Drolet 45221 owner manual Installation Instructions

Page 10

2.4Installation Instructions

1.Inspect the fireplace according to the safety information and fireplace requirements and have it cleaned and/or upgraded as necessary.

2.If the installation of the unit renders the existing damper control inaccessible, it will be necessary to either secure the damper wide open or remove it entirely. An inaccessible damper, which may close, could cause smoke to enter the room. This creates a potential health hazard.

3.CONNECTOR INSTALLATION: A flue connector may provide acceptable performance, however, we recommend the use of a chimney liner to ensure satisfactory performance. Slip connectors for continuous liners should also be installed. Use Listed Chimney Liners – UL1777, CAN/ULC-S635. The connector must be secured with a minimum of three screws. In order to connect the chimney liner to a chimney, refer to figure 2.3 and follow these steps. Secure a stove pipe adapter (B) to the chimney (A). Then, secure the chimney liner (C) to the stove pipe adapter (B). Secure the chimney liner (C) to the adapter (D). Finally, secure the adapter (D) to the appliance.

4.ATTENTION INSTALLER: When positioning the unit in a fireplace opening prior to the flue installation, install the insert into the opening until the top lip of air jacket is flush with fireplace facing.

Figure 2.2

Figure 2.3

4.If lag-bolts and anchors are to be used to secure the insert, the hole locations should be marked with the unit in place. Remove the insert and locate the anchors.

5.Remove the faceplate panels from their box and assemble according to the following instructions.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Escape 1400-I Insert Introduction Table of Contents Escape 1400-I Dimensions Pre-Installation Requirements Masonry & Zero Clearance RequirementsVenting Requirements Installation Clearances To Combustibles Measured From Insert BodySuitable Fireplace Dimensions Hearth RequirementsSafety Information Installation Instructions Air control plate, faceplate and fan Assembly Instructions Installation of the adapter for fresh air kit Operation Fuel Simple Wood Moisture Test Lighting a FireDraft Settings Maintaining The Fire Fan OperationCare And Cleaning MaintenanceGlass Cleaning and maintenance Chimney Cleaning Ash RemovalBaffle Installation for Escape Baffle installation & removal for EscapeSecondary Air Tube Replacement Important NotesFan Maintenance & Care Removal instructionsSpecifications Escape 1400-I Insert ModelDrolet Limited Lifetime Warranty

45221 specifications

The Drolet 45221 is a highly efficient and powerful wood stove that epitomizes the blend of traditional craftsmanship and modern technology. Engineered to deliver exceptional heating performance, this model stands out in the realm of residential wood stoves, making it a preferred choice for homeowners seeking both comfort and efficiency.

One of the most significant features of the Drolet 45221 is its impressive heating capacity. The stove can effectively heat areas up to 2,000 square feet, making it an ideal solution for medium to large spaces. Its robust design ensures a steady and consistent heat output, allowing you to maintain an ambient and cozy environment during the cold months.

Equipped with advanced combustion technology, the Drolet 45221 promotes optimal efficiency while reducing smoke emissions. Its secondary combustion system re-burns gases to extract maximum heat from the wood, which not only enhances efficiency but also provides cleaner burning. This environmentally friendly feature aligns with growing concerns about air quality and compliance with strict emission regulations.

The stove is constructed from high-quality materials, including a durable cast iron door and a resilient steel body. This construction not only ensures longevity and durability but also provides aesthetic appeal, allowing the stove to seamlessly blend into various interior designs. The large firebox is designed to accommodate longer logs, reducing the frequency of reloads and providing sustained heat for longer periods.

Additionally, the Drolet 45221 includes adjustable airflow controls that enable users to customize the burn rate according to their heating needs. This flexibility not only enhances user experience but also allows for better fuel economy, as users can optimize the stove's performance based on specific conditions.

Another notable characteristic is its large viewing window, which incorporates a ceramic glass that allows users to enjoy the mesmerizing flames while ensuring safety and efficiency. This design enhances the overall ambiance of the room, turning the stove into a focal point of warmth and comfort.

In conclusion, the Drolet 45221 wood stove combines efficiency, aesthetic appeal, and user-friendly features to provide a remarkable heating solution. With cutting-edge technology, durable construction, and potent heating capabilities, it represents a smart investment for anyone looking to enhance their home heating experience. Whether for supplemental heat or as a primary heating source, the Drolet 45221 is a reliable choice that meets modern heating demands while maintaining an environmentally responsible footprint.
Top Page Image Contents