Venting Requirements | Drolet 45221 instruction

1.2 Venting Requirements

The flue is a critical component to a satisfactory installation. Your insert will attain its best performance if installed with a flue that generates its own draft. The minimum venting requirement will be the installation of a flue connector from the insert into the first tile of the chimney (see Figure 2.3). If you are using a masonry chimney, it is important that it be built in compliance with the specifications of the National Building Code or other applicable standard having jurisdiction. It must be lined with fire clay bricks, metal or clay tiles sealed together with fire cement (round flues are the most efficient). Ideally, the interior diameter of the masonry chimney should be identical to the insert smoke exhaust. You may also run a stainless steel liner inside the masonry chimney. A continuous 6" (152mm) stainless steel liner from the top of the chimney to the insert’s smoke exhaust (see Figure 2.2) is the optimum system and will provide the best performance, as well as compensate for poor draft situations caused by large cross-sectional chimneys. The insert will not work without a positive seal in the chimney.

Chimneys constructed outside of the home, on an exterior wall, should be avoided if possible, especially in colder climates. Outside chimneys may not draw as well and may downdraft due to the difficulty in heating them up to operating temperature. Cooler chimneys will result in increased creosoting, less draft, and poorer performance. Draft is proportional to overall chimney height as well as to stack temperature. Draft can be increased by increasing chimney height, and by reducing heat loss from the chimney through an insulated liner.

Ensure that all joints in the flue systems are tightly sealed, since any leaks will result in reduced performance as well as a possible safety hazard. Using a fire screen at the extremity of the chimney requires regular inspection in order to insure that it is not obstructed thus blocking the draught, and it should be cleaned when necessary.

Do not connect this unit to a chimney flue serving another appliance.

This heating unit must serve as a supplementary heat source. An alternate heat source should be available in the home if needed. The manufacturer cannot be responsible for additional heating costs associated with the use of an alternative heat source.

It is recommended that the user buys this product from a retailer who can provide installation and maintenance advices.

45221 specifications

The Drolet 45221 is a highly efficient and powerful wood stove that epitomizes the blend of traditional craftsmanship and modern technology. Engineered to deliver exceptional heating performance, this model stands out in the realm of residential wood stoves, making it a preferred choice for homeowners seeking both comfort and efficiency.

One of the most significant features of the Drolet 45221 is its impressive heating capacity. The stove can effectively heat areas up to 2,000 square feet, making it an ideal solution for medium to large spaces. Its robust design ensures a steady and consistent heat output, allowing you to maintain an ambient and cozy environment during the cold months.

Equipped with advanced combustion technology, the Drolet 45221 promotes optimal efficiency while reducing smoke emissions. Its secondary combustion system re-burns gases to extract maximum heat from the wood, which not only enhances efficiency but also provides cleaner burning. This environmentally friendly feature aligns with growing concerns about air quality and compliance with strict emission regulations.

The stove is constructed from high-quality materials, including a durable cast iron door and a resilient steel body. This construction not only ensures longevity and durability but also provides aesthetic appeal, allowing the stove to seamlessly blend into various interior designs. The large firebox is designed to accommodate longer logs, reducing the frequency of reloads and providing sustained heat for longer periods.

Additionally, the Drolet 45221 includes adjustable airflow controls that enable users to customize the burn rate according to their heating needs. This flexibility not only enhances user experience but also allows for better fuel economy, as users can optimize the stove's performance based on specific conditions.

Another notable characteristic is its large viewing window, which incorporates a ceramic glass that allows users to enjoy the mesmerizing flames while ensuring safety and efficiency. This design enhances the overall ambiance of the room, turning the stove into a focal point of warmth and comfort.

In conclusion, the Drolet 45221 wood stove combines efficiency, aesthetic appeal, and user-friendly features to provide a remarkable heating solution. With cutting-edge technology, durable construction, and potent heating capabilities, it represents a smart investment for anyone looking to enhance their home heating experience. Whether for supplemental heat or as a primary heating source, the Drolet 45221 is a reliable choice that meets modern heating demands while maintaining an environmentally responsible footprint.