Maintaining The Fire, Fan Operation | Drolet 45221 specification

3.5 Maintaining The Fire

Your Drolet insert will work best if a thick bed of hot embers is maintained in the bottom of the firebox, and a minimum of two large pieces of seasoned fuel are added. Combustion efficiency is largely related to establishing a hot ember bed, and hot firebox temperatures. The quicker the insert and fuel get up to operating temperature, the better. A small intense fire is preferred to a large smouldering fire, both to improve combustion efficiency and to reduce the amount of creosote emitted. The best performance will be achieved by adding relatively small amounts of fuel to a well established ember bed, and then operating with the air inlet control open long enough to achieve a hot fire. Cordwood should be placed with air in between individual pieces. Use a poker to make an air channel in the embers below the wood, this will allow air to flow under the wood for a more efficient burn. Extended burn times can be accomplished by first operating the insert on a full load with the air inlet controls wide open. Once the fire is well established, and the moisture has been driven out of the wood, reduce the air control to a lower setting. The unit should then burn cleanly without smouldering. If the fire smoulders without flame, re-establish a hotter fire before moving the air control to the lower setting. A yellow flame burning in the top of the firebox is a good indication of a clean efficiently burning fire.

Refuelling technique is important for good performance. The best efficiency and performance from your insert can be achieved by adding partial loads of fuel and allowing them to get up to operating temperature before adding additional fuel. Adding a large amount of fuel at one time will increase the time required to get the fuel up to its ignition temperature, and an extended time to reach optimal performance. When refuelling, open the air control or hold the door partially open 1” (25 mm) or less, long enough (less than 5 minutes) so that the fire has well established flames. When refuelling, care is required to ensure that fuel or embers do not fall out of the door opening.

In order to achieve an optimum efficiency from your unit, we suggest that you operate it with the air control slightly open (approximately 10%). Make sure that you have a good fire going and an adequate ember bed before you completely close the air control. Closing the air control too soon will lower combustion efficiency and may cause the fire to die out. The addition of a blower (if not already included) is highly recommended to maximize your unit’s efficiency.

3.6Fan Operation

1.The fan in your wood insert is heat-activated. The insert needs to be hot before the fan starts working. This may take up to one hour, depending on how hot the fire is.

NOTE: ENSURE THE FAN CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE INSERT TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN CORD BENEATH THE INSERT.

2.You may shut the fan OFF using the variable speed control knob located on the left side of the fan assembly..

45221 specifications

The Drolet 45221 is a highly efficient and powerful wood stove that epitomizes the blend of traditional craftsmanship and modern technology. Engineered to deliver exceptional heating performance, this model stands out in the realm of residential wood stoves, making it a preferred choice for homeowners seeking both comfort and efficiency.

One of the most significant features of the Drolet 45221 is its impressive heating capacity. The stove can effectively heat areas up to 2,000 square feet, making it an ideal solution for medium to large spaces. Its robust design ensures a steady and consistent heat output, allowing you to maintain an ambient and cozy environment during the cold months.

Equipped with advanced combustion technology, the Drolet 45221 promotes optimal efficiency while reducing smoke emissions. Its secondary combustion system re-burns gases to extract maximum heat from the wood, which not only enhances efficiency but also provides cleaner burning. This environmentally friendly feature aligns with growing concerns about air quality and compliance with strict emission regulations.

The stove is constructed from high-quality materials, including a durable cast iron door and a resilient steel body. This construction not only ensures longevity and durability but also provides aesthetic appeal, allowing the stove to seamlessly blend into various interior designs. The large firebox is designed to accommodate longer logs, reducing the frequency of reloads and providing sustained heat for longer periods.

Additionally, the Drolet 45221 includes adjustable airflow controls that enable users to customize the burn rate according to their heating needs. This flexibility not only enhances user experience but also allows for better fuel economy, as users can optimize the stove's performance based on specific conditions.

Another notable characteristic is its large viewing window, which incorporates a ceramic glass that allows users to enjoy the mesmerizing flames while ensuring safety and efficiency. This design enhances the overall ambiance of the room, turning the stove into a focal point of warmth and comfort.

In conclusion, the Drolet 45221 wood stove combines efficiency, aesthetic appeal, and user-friendly features to provide a remarkable heating solution. With cutting-edge technology, durable construction, and potent heating capabilities, it represents a smart investment for anyone looking to enhance their home heating experience. Whether for supplemental heat or as a primary heating source, the Drolet 45221 is a reliable choice that meets modern heating demands while maintaining an environmentally responsible footprint.