Pre-Installation Requirements | Drolet 45221 manual

Section 1.0 Pre-Installation Requirements

1.1 Masonry & Zero Clearance Requirements

The masonry fireplace must meet the minimum code requirements, or NFPA 211 or the equivalent for a safe installation. Contact your local Building Inspector for requirements in your area. An inspection of the fireplace should include the following:

1.CONDITION OF THE FIREPLACE AND CHIMNEY: Examine the masonry fireplace and chimney prior to installation to determine that they are free from cracks, loose mortar, creosote deposits, blockage, or other signs of deterioration. If evidence of deterioration is noted, the fireplace or chimney should be upgraded prior to installation.

2.INSTALLATION INTO AN EXISTING FACTORY-BUILT ZERO-CLEARANCE FIREPLACE: It is possible to install a wood insert into an existing factory-builtzero-clearance fireplace. However, there currently exists no UL or ULC standard specific to that type of installation. The first thing that must be verified is that the factory-built zero clearance fireplace is listed (it must be certified by a competent certification body such as Omni or Warnock Hersey). It must be suitable for use with solid fuel and nothing in the owner’s manual must specifically prohibit the installation of a fireplace insert. When in doubt, check with the fireplace manufacturer. The installation of the zero-clearance fireplace MUST be thoroughly inspected by a professional in order to ensure that it still meets the manufacturer’s specs and code conformity. The chimney must be of at least 1" (25 mm) larger in diameter to accommodate a required continuous stainless steel liner running from the flue collar to the top of the chimney termination.

Never remove parts that serve to insulate the zero-clearance fireplace from combustible material. Only readily detachable parts that are easily replaced, such as damper parts, screens, and doors, are to be removed from the fireplace. These parts must be stored nearby and available for retrofit if the insert is ever removed. Removal of any parts which render the fireplace unfit for use with solid fuel requires the fireplace to be permanently labelled by the installer as being no longer suitable for solid fuel until the removed parts are replaced and the fireplace is restored to its original certified condition. Furthermore, any air vents, grilles, or louvers that serve to create an air circulation pattern around and outside the zero- clearance fireplace shall never be removed.

3.CHIMNEY CAPS: Mesh type chimney caps must have provision for regular cleaning, or the mesh should be removed to eliminate the potential of plugging.

4.LINER: The chimney must have an acceptable masonry liner suitable for solid fuel, otherwise a continuous stainless steel liner must be installed.

5.ADJACENT COMBUSTIBLES: The fireplace should be inspected to make sure that there is adequate clearance to combustibles, both exposed combustibles to the top, side, and front as well as concealed combustibles, in the chimney and mantel area. Your local inspector should have information on whether older fireplaces are of adequate construction.

6.OPENING SIZE: Refer to “Suitable Fireplace Dimensions” (Sec. 2.2) for suitable size fireplace openings.

NOTE: A METAL TAG IS PROVIDED AND IS TO BE FASTENED TO THE BACK WALL OF THE FIREPLACE IF THE FIREPLACE HAS BEEN MODIFIED TO ACCOMMODATE THE INSERT.

45221 specifications

The Drolet 45221 is a highly efficient and powerful wood stove that epitomizes the blend of traditional craftsmanship and modern technology. Engineered to deliver exceptional heating performance, this model stands out in the realm of residential wood stoves, making it a preferred choice for homeowners seeking both comfort and efficiency.

One of the most significant features of the Drolet 45221 is its impressive heating capacity. The stove can effectively heat areas up to 2,000 square feet, making it an ideal solution for medium to large spaces. Its robust design ensures a steady and consistent heat output, allowing you to maintain an ambient and cozy environment during the cold months.

Equipped with advanced combustion technology, the Drolet 45221 promotes optimal efficiency while reducing smoke emissions. Its secondary combustion system re-burns gases to extract maximum heat from the wood, which not only enhances efficiency but also provides cleaner burning. This environmentally friendly feature aligns with growing concerns about air quality and compliance with strict emission regulations.

The stove is constructed from high-quality materials, including a durable cast iron door and a resilient steel body. This construction not only ensures longevity and durability but also provides aesthetic appeal, allowing the stove to seamlessly blend into various interior designs. The large firebox is designed to accommodate longer logs, reducing the frequency of reloads and providing sustained heat for longer periods.

Additionally, the Drolet 45221 includes adjustable airflow controls that enable users to customize the burn rate according to their heating needs. This flexibility not only enhances user experience but also allows for better fuel economy, as users can optimize the stove's performance based on specific conditions.

Another notable characteristic is its large viewing window, which incorporates a ceramic glass that allows users to enjoy the mesmerizing flames while ensuring safety and efficiency. This design enhances the overall ambiance of the room, turning the stove into a focal point of warmth and comfort.

In conclusion, the Drolet 45221 wood stove combines efficiency, aesthetic appeal, and user-friendly features to provide a remarkable heating solution. With cutting-edge technology, durable construction, and potent heating capabilities, it represents a smart investment for anyone looking to enhance their home heating experience. Whether for supplemental heat or as a primary heating source, the Drolet 45221 is a reliable choice that meets modern heating demands while maintaining an environmentally responsible footprint.