Site Selection and Preparation
furniture and high traffic.
2.For ease of electrical hook up you may wish to locate the fireplace near an existing outlet (refer to NOTE 1).
3.Store the fireplace in a safe dry and dust free location.
!NOTE: The dimensions of the fireplace are 31 ½ inches
(800 mm) wide x 22 ⅜ inches
(568 mm) high x 9 ⅛ inches
(232 mm) deep. The fireplace does not require any additional venting.
Fireplace Installation
CAUTION: Clearance for air circulation beneath the fireplace insert is provided by
Figure 1
two (2) rubber feet.
Do not install the fireplace insert directly on carpet or similar surfaces which may restrict air circulation.
CAUTION: If installing the fireplace in a carpeted area, place a
9 ½” |
(241 mm) |
22 ¾” |
(578 mm) |
31 ¾”
(8
0
7 mm)
that both of the insert’s feet rest securely on this surface.
Mantel Installation
Install the fireplace assembly into the mantel (refer to mantel assembly instructions).
!IMPORTANT: If not using
a Dimplex mantel, the fireplace must be installed in an enclosure with the following minimum internal/opening dimensions (Figure 1).
New Wall Construction
1. Select a suitable location that
8 | www.dimplex.com |