Enviro EG-40 owner manual Deciding Where to Locate Your Stove, Unit Dimensions

Page 5

4.DECIDING WHERE TO LOCATE YOUR STOVE

DIMENSIONS:

UNIT DIMENSIONS:

Front Width:

26"/66 cm

Height Front:

22"/56 cm

Height Back:

19-3/4"/50 cm

Total Depth:

22-1/2"/57 cm

Shipping Weight:

256 lb./116 kg

SURROUND DIMENSIONS:

STANDARD

40" /101 cm

 

28-1/2" /71 cm

OVERSIZE

46” / 116.8 cm

 

33” / 83.2 cm

A. Mantle pillar to stove 10"/ 25 cm B. Stove to 8" wide mantle 12"/ 31 cm

Stove must sit on a non-combustible surface, the width and depth of the insert Maintain sufficient clearances

for operation, service and maintenance

OTHER DIMENSIONS

A. Depth of unit into fireplace 17"/ 43 cm B. Depth of unit out of fireplace 9 3/4"/ 25 cm

C. Width of side panel

7"/ 18 cm

D. Stove top to surround top

6 3/4"/ 17 cm

E. Minimum firebox size W 36"x H 24"x D24" (W92 x H61 x D61) cm

8”

22 1/2”

12”

28 1/2”

19 3/4”

40”

26”

5

Image 5
Contents What to do if YOU Smell GAS N E R S M a N U a LGeneral Safety PrecautionsFor Your Safety Code Approvals Table of ContentsSpecifications Assembling and Installing Your Envirogas Appliance Assembly and Installation InstructionsPreparation for Installation Unit Dimensions Deciding Where to Locate Your StoveDimensions Vent Terminal Clearances Venting Fireplace Inserts VentingDo not Place Embers on the Rear Burner Installing the Logset Installing the Glowing EmbersOperating Instructions For Your Safety Read Before OperatingLighting Instructions What to do if YOU Smell GASRoutine Maintenance Problem Cause Solution Trouble ShootingGAS Line Connection Never USE AN Open Flame for Leak TestingOrifice SIZES, Pressure and BTU’S Natural GAS Propane GAS Front BurnerElectrical Requirements Installing Remote Thermostat or Wall SwitchService Parts available from your local Envirogas Dealer Parts and AccessoriesFuel Type Conversion To a Maximum of Seven Years WarrantyModel EG 40 FPI Installation Data Sheet