Removing Valve, Screws | Hampton Direct H25-LP1 Propane instruction

MAINTENANCE

3)Unclip the black and white wires from the fan motor.

4)Remove the 2 bolts holding the fan to the rear base. Disconnect the green ground wire from the right side of the fan as soon as you can reach it.

Replacing the Fan:

Reverse the above steps (1 - 4). Make sure the fan wires and the ground wire are reat-

6)Disconnect piezo wire.

7)Lift off the Cast Top and lift out the front door.

8) Carefully remove the logs and embers.

9)Remove burner by removing the 2 screws on each side and then lifting the burner tray out.

Screws

Note: Use a magnetic type screwdriver if possible.

12)To remove the valve, remove the 4 screws (2 per bracket) that hold the valve to the valve bracket assembly.

13)To replace the burner tray assembly, simply reverse these instructions.

To remove valve from valve assembly, continue.

14)	Remove two (2) thermopile wires.
15)	Remove thermocouple with a 9 mm (metric)
	wrench.
16)	Remove pilot nut with an 11 mm wrench.
17)	Remove valve to oriﬁ ce nut with a 13/16"
	wrench.
18)	Remove inlet pipe with pipe wrench. Note
	orientation of 90o elbow.
19)	Remove two (2) phillips head M5 screws on
	each side of the valve.

REMOVING VALVE

If your valve requires maintenance or replace- ment, use the following instructions:

Note: Alwayscloseoffthegassupplybefore removing the valve.

1)If optional fan is installed, disconnect power source to stove.

2)Remove access panel.

3)Disconnect gas line to stove.

4)Disconnect 3/8" NPT pipe from 90o elbow on valve or ﬂ ex connector.

5)Disconnect the two (2) switch wires from valve.

10)Remove all 6 screws holding the burner tray assembly in place.

11)Carefully lift the burner tray assembly out.

20) Remove valve and remove gas out 90o brass

ﬁ tting. Note orientation of ﬁ tting.

INSTALLING

VALVE ASSEMBLY

1)To install a new valve assembly, reverse instructions for removing valve. See as- sembly steps 1-12.

2)Check for leaks and manifold pressure. See Gas Pressure Test instructions.

3)To reinstall valve, reverse instructions for removing valve assembly, steps 13-19.

Hampton® H25-1 Direct Vent Freestanding Gas Stove

H25-LP1 Propane, H25-NG1, H25-LP1 specifications

Hampton Direct H25 series, which includes the H25-NG1, H25-LP1, and H25-LP1 Propane models, represents an innovative lineup of gas stoves designed to deliver efficient heating with modern aesthetics. These stoves are perfect for residential and recreational use, providing an economical solution for space heating with exceptional comfort and performance.

One of the standout features of the H25 series is its multi-fuel capability. The H25-NG1 operates on natural gas, while the H25-LP1 and H25-LP1 Propane models utilize liquid propane. This flexibility allows homeowners to select the model that best fits their energy source availability. Each of these units is designed with a powerful heat output, ensuring efficient coverage of living spaces, making them suitable for open floor plan homes and larger areas.

The stoves incorporate advanced combustion technologies, which enable them to burn fuel more efficiently. This leads to less environmental impact, lower emissions, and improved energy use. The H25 series devices utilize a patented firebox design that maximizes heat retention, resulting in extended heating times and better temperature control. Users can expect significant energy savings, as the stoves are engineered to extract more heat from the fuel consumed.

Aesthetically, the H25 series offers an elegant design that adds a contemporary touch to any room. The clean lines and modern finish allow the units to blend seamlessly with various interior styles. Moreover, the units feature large viewing windows that provide a mesmerizing flame display, creating a cozy and inviting atmosphere.

Ease of use is another critical characteristic. Each model comes with user-friendly controls that allow homeowners to adjust the flame height and heat output easily. Additionally, the units have safety features, including automatic shut-off valves, ensuring peace of mind.

The H25 series is engineered for durability, featuring high-quality materials that withstand the test of time. Whether selected for a primary residence or a cozy retreat, the Hampton Direct H25-NG1, H25-LP1, and H25-LP1 Propane models offer an outstanding combination of efficiency, design, and performance that aligns with today’s heating needs.