Avalon Stoves Flush Wood Insert Install the trim and rheostat following the directions below

Page 13

Installation (for qualified installers only)

13

2. Install the top panel following the directions below.

HINT: Before installing the top panel, position the insert in its final location (1-1/4" from the fireplace opening) and attach the flue to the insert.

Slide the top panel into place. The joggle clips on the back of the panel insert over the tabs on the side panel and the flange on top of the insert.

3. Install the trim and rheostat following the directions below.

Spring Clips

Trim Installation:

Insert one leg of each "L" bracket into the top and side trim piece. Align the trim to form a precise corner, then tighten the two set screws with a small standard screwdriver. Slide the trim over the panels. Place the spring clips behind the panels at the locations shown. This keeps the trim tight against the panels.

Top Trim

Micro (1/16”)

Slotted

Screwdriver

Right Side Trim

"L" Bracket

Knock-Out for Power Cord

Secure the rheostat using the included nut and star washer. The knob presses into place.

Attach the rheostat wires (orientation does not matter).

A knock-out is provided on both sides the trim. Use pliers to remove the knock-out. This allows the power cord to pass under the trim.

© Travis Industries

100-01157

4041116

Image 13
Contents Flush Wood Insert Introduction Important Information 2IntroductionTable of Contents Ashes Safety PrecautionsThis Manual Features & Specifications Preparation for Installation Planning The InstallationAdditional Accessories Needed for Installation Suggested Order of InstallationMasonry Fireplace Requirements Installation ConsiderationsHearth Requirements Face Dimensions Insert Placement RequirementsFlue Installation Leveling Bolt InstallationDrafting Performance Block-Off Plate Template Block-Off Plate InstallationSurround Panel Installation Install the trim and rheostat following the directions below Face Installation Face InstallationRe-Routing the Electrical Cord to the Left Side Insert with Direct Connection Insert with Positive ConnectionOperating Your Appliance Safety NoticeBefore Your First Fire Closing the Doors Door OperationBypass Operation Starting a Fire Approximate Air Control Settings Adjusting the Burn RateAsh Removal Re-Loading the Stove Blower OperationOvernight Burn Normal Operating SoundsWhy Dry Wood is Key Testing Wood MoistureHints for Burning Selecting WoodTroubleshooting Clean the Glass if necessary Daily Maintenance while stove is in useMaintaining Your Appliance Remove Ash if necessaryDoor and Glass Inspection Monthly Maintenance while appliance is in useCreosote Formation and Need for Removal Cleaning the Air Duct and Blower Yearly MaintenanceTouch Up Paint Firebrick and Baffle InspectionReplacing the Glass Door PartsReplacing the Door Gasket Replacing the Door HandleFirebox Parts Blower and Electrical PartsBaffle Parts Baffle RemovalAIR Tube Removal Air Tube Removal & ReplacementBrick Removal & Replacement Years 1 & 2 Coverage Parts & Labor Limited 7 Year WarrantyListing Label Listing InformationTravis Industries 100-01157 4041116

Flush Wood Insert specifications

The Avalon Stoves Flush Wood Insert is a remarkable addition to modern heating solutions, combining efficiency, style, and environmental consciousness. Designed to fit seamlessly into traditional and contemporary home aesthetics, this wood insert delivers a powerful performance while enhancing the ambiance of any living space.

One of the standout features of the Avalon Flush Wood Insert is its impressive heating capacity. With a large firebox, it can accommodate logs up to 18 inches in size, providing ample space for a robust fire. This allows the insert to produce up to 75,000 BTUs, making it suitable for heating larger areas and offering a cozy, inviting atmosphere during the cold months.

The insert is engineered with advanced technologies that enhance its efficiency and reduce emissions. The patented “combustion technology” ensures optimal airflow around the fire, resulting in a cleaner burn. This technology not only maximizes the heat output but also minimizes the release of harmful pollutants into the environment, adhering to the strictest governmental regulations on emissions.

Another significant characteristic of the Avalon Flush Wood Insert is its sleek, low-profile design. The flush fit creates a built-in look, making it appear as part of the wall rather than a bulky addition. This design aesthetic allows homeowners to enjoy the warmth of a real wood fire without sacrificing their interior decor.

The insert also features an easy-to-use lift-up door, providing convenient access to the firebox. The large glass viewing area allows users to enjoy the view of the flames, further enhancing the ambiance of their home. The door’s design includes a robust air wash system that helps keep the glass clean, ensuring a clear view of the fire at all times.

In terms of installation, the Avalon Flush Wood Insert is designed for versatility. It can be installed in a variety of existing fireplaces or as part of a new installation, offering homeowners flexibility in their heating solutions. Additionally, it is compatible with both traditional and modern masonry chimneys, further broadening its applicability.

With its combination of efficiency, innovative technology, and tasteful design, the Avalon Stoves Flush Wood Insert is an excellent choice for anyone seeking a reliable and stylish heating solution. This product not only heats your home effectively but also contributes to a more sustainable environment by minimizing emissions and promoting the use of renewable resources.