HP 600n Print Server Ethernet/LocalTalk manual Verify That the Card Was Installed Correctly

Note	For the HP J3111A Ethernet card, you can connect
	to the LocalTalk port and to only one of the Ethernet
	ports (RJ-45 or BNC).
	For the HP J3112A Token Ring card, you can
	connect to only one of the Token Ring ports
	(RJ-45 or DB 9).

7.Turn on the printer (or mopier).

Step 5. Verify That the Card Was Installed Correctly

1.Print another Printer Configuration Page (or Service Configuration print) as described previously in Step 3 and verify that JetDirect Configuration Page information also prints.

In HP LaserJet printers, a JetDirect Configuration Page will print for each EIO slot that contains an HP JetDirect card.

2.In the General Information section of the JetDirect Configuration Page, locate the message “I/O CARD READY”.

This section of the configuration page also contains product- specific information, such as:

■HP JetDirect product number

■Firmware revision number

■LAN Hardware (MAC) address

■Manufacturing identification number

Note	For a description of other messages that may appear
	on the JetDirect Configuration Page, refer to the
	HP JetDirect administrator’s guide located on the
	HP JetDirect CD-ROM.

2-8 Installing the Print Server