Step 2. If Necessary, Set Switches or Jumpers on Your Card
●If you have an HP J3112A Token Ring print server, you must set the Data Rate switches on the card to either 4 Mbps or 16 Mbps. The selection depends on the data rate of your Token Ring network.
4 Mbps | 16 Mbps |
a.Locate the Token Ring card Data Rate switches.
b.Set the switches to 4 or 16 Mbps. The default is 16 Mbps.
●If you have an HP J3113A
P1 = AUTO
10/100; Half/Full
Autonegotiation
Note | For the definition of other jumper settings on the |
| |
|
|
|
|