Mounting the Base Unit on a Wall | Uniden EXP 9100 guide

Mounting the Base Unit on a Wall

Installing the Wall-Mount Adapter on the Base Unit

1.Remove the Handset from

the Base Unit.

2. Lay the Base Unit face down on a flat, smooth surface.

3. Insert the two front tabs of the Wall Mount Adapter into the two receptacles next to the legs of the Base Unit.

4. Squeeze the two side tabs of the Wall Mount Adapter and snap them into the receptacles near the bottom edge of the Base Unit.

Setting the Handset Retainer

1.Remove the Handset Retainer on the Base Unit by sliding it upward.

2.Flip the Retainer over so the tab is facing up.

3.Slide the Retainer back into the Base Unit.

The Base unit of your EXP 9100 is now ready to be mounted on a standard wall plate or mounted directly to a wall.

9

Image 9

Uniden EXP 9100 specifications Mounting the Base Unit on a Wall, Installing the Wall-Mount Adapter on the Base Unit

Contents

Table of Contents Important Safety Instructions Page About Your EXP UnpackingFCC Requirements Automatic Digital Code Security EXP 9100 Features Auto Power Control Auto Channel Scan and Auto Channel ChangeSpread Spectrum Technology Installing Your EXP Selecting the Installation LocationConnecting the Telephone Line Installing the Base Unit on a Desk or Tabletop Installing the Wall-Mount Adapter on the Base Unit Setting the Handset RetainerMounting the Base Unit on a Wall Mounting Directly on a Wall Mounting on a Standard Wall Plate Installing the Battery Pack BT-9100 Charging Extra Battery Packs Charging the Handset’s Battery Pack Base Unit Battery Back-Up Feature Low Battery IndicatorCleaning the Battery Contacts Preparing the Base Unit and Handset Using Your EXP Answering a Call Making a CallDialing a Stored Number Special Features Storing a Number Using Your EXP 9100 MemoryPress Storing a One-Touch Dialing Number Storing Mixed Tone/Pulse numbers Using your EXP 9100 IntercomErasing a Stored Number Paging from the Base Unit Paging the Base Unit While a Call is Holding Using the EXP 9100 as a Room MonitorPaging from the Handset to the Base Unit To turn Room Monitoring on Problem Suggestion Troubleshooting Important Electrical Considerations Telephone Line ProblemsRange Radio Interference Specifications Base UnitHandset EXP Nickel-Cadmium Battery Disposal Precautions One Year Limited Warranty ZUDUD01304AZ Base Unit Controls & Functions Handset Controls & Functions