Uniden EXP 9100 specifications Installing the Base Unit on a Desk or Tabletop

Installing the Base Unit on a Desk or Tabletop

NOTE: Refer to the foldout located in the back of this Operating Guide to help familiarize you with the controls of your cordless phone.

1.Place the Base Unit on

a desk or tabletop, and plug one end of the Telephone Line Cord (supplied) into the “LINE IN” jack on the Base.

2.Plug the other end of

the Telephone Line Cord into the telephone wall jack.

3.Plug the AC Adapter

cord into the AC Adapter input jack on the Base Unit.

(Note: Use only the AC Adapter supplied with the EXP 9100.)

4.Plug the AC Adapter into a standard 120V AC wall outlet.

5.Route the power cord where it will not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards.

The unique design of your EXP 9100 allows you to place the Handset on the Base Unit either face down or in an upright position. Also, you may extend the legs on the bottom of the Base Unit, placing it at an angle for better visibility of the LEDs (See the Base Unit Fold-out illustration). Remove the Handset Support in the charging cradle so the handset remains in a stable, upright position. The Battery Pack in the Handset automatically recharges in either position.

8