Uniden EXP 9100 specifications Installing the Battery Pack BT-9100

4. Plug the AC Adapter cord into the AC Adapter input jack on the Base Unit.

(Note: Use only the AC Adapter supplied with the EXP 9100.) Place the cord inside the molded channel on the Wall Mount Adapter connected to the Base Unit.

5. Place the Base Unit onto the mounting screws and slide downward to secure. Then hang the Handset on the Base Unit.

5. Plug the other end of the Telephone Line Cord into the telephone wall jack.

7.Plug the AC Adapter into a standard 120V AC wall outlet.

8.Route the power cord where it will not create a trip hazard, or where it will not become chafed and create a fire or other electrical hazards.

Installing the Battery Pack (BT-9100)

1.Remove the battery compartment cover on the Handset by sliding it down.

2. Slide in the Nickel-Cadmium Battery Pack (Note: The Battery Pack is keyed to fit so the electrical contacts touch the Handset’s electrical contacts.)

3. Slide the battery compartment cover back on.

After removing the Battery Pack, the built-in Memory Backup feature allows up to 3 minutes to install a charged Battery Pack. This feature prevents losing any phone numbers that may be stored in the telephone’s memory.

11