Regency Wraps Z2510L Clearances Height Requirements, Fireplace Enclosure Framing

Page 7

INSTALLATION

FAILURE TO USE PARTS MANU- FACTURED BY REGENCY FIRE- PLACE INDUSTRIES OR VARIA- TIONS IN TECHNIQUES AND CON- STRUCTION MATERIAL DESCRIBED IN THIS MANUAL MAY CREATE A FIRE HAZARD AND VOID REGEN- CY’S WARRANTY.

The WarmHearth main unit consists of the following:

1)The main fire box and heat exchanger

2)The large door with ceramic glass

3)A full brick lining and flue baffle

4)The upper and lower louvers

5)The insulated outside air duct

6)The hearth extension floor protector used for flush mount installations

7)Hearth Safety Strip

8)The internal blowers system (optional)

9)A Furnace Damper Control (optional)

10)The Masonry Retainer Kit (Optional)

11)Furnace Blower (optional)

CLEARANCES

AND HEIGHT

REQUIREMENTS

The WarmHearth may be placed on or near construction materials. The combustion air kit, fire stop spacer and roof flashings (not chase flashings) may be placed directly on or against

normal construction materials. The chimney requires a minimum 2 in. (50 mm) clearance. A combustible mantle (to a depth of 10 in.) may be installed no closer than 18 in. (457 mm) above the warm air vent.

The chimney must be enclosed when installed in or passing through a living area where combustible material or people may come in contact with it. This is important to prevent possible personal injury or fire hazard.

For any further information, please call your dealer. Special restrictions apply to the front and facing of the fireplace and nearby walls.

WARNING: If insulation is used, do not place the unit against it. Insulation or vapor barriers, if used, must be secured to assure insulation and vapor barriers remain in place and do not affect the required air spaces.

WARNING: Do not pack or fill required air spaces with insulation or other material. No material of any kind is allowed in these areas.

No Combustibles on Face of Unit

Combustibles May Not Extend to Unit Face

Do not notch wallboard around standoffs

NOTE:

1)Do not insulate the chase cavity with blown or fill type insulation materials.

2)Local codes may not require firestopping at the ceiling level for outside chase installa- tions; however, it is recommended for safe- ty and the reduction of heat loss.

3)We recommend that you insulate at least the first floor of the chase to prevent heat loss.

4)Some local codes require 1 hour fire rating on one or all sides of fire chases. Check with your local authorities.

FIREPLACE

ENCLOSURE FRAMING

As per the diagram, the framing of the main enclosure should not infringe on the area above the fireplace to the ceiling level. The rear and side walls as well as the face above the fireplace must not extend into the area above the unit. The only structure allowed above the unit is on the stand-offs at the front of the unit supporting the header.

The enclosure walls can be framed using any suitable material (2 x 4 - 2 x 6 studs, plywood, gyproc, etc.), 2 x 6 is not acceptable for header.

Normally, framing will be set back to allow sheathing to be flush with the front of the fireplace.

Framing Specifications

When framing in the header (directly above the fireplace) DO NOT bring any combustible material lower than the top of the stand-offs.

Be sure to seal the space between the fire- place and the enclosure above with Wonder- board, Durock or other similar non-combustible sheeting to prevent hot air from entering the enclosure.

Clearances to Combustibles

CAUTION: ONLY NON-COMBUSTI- BLE MATERIAL LIKE EXPANDED METAL OR CONCRETE BOARDS SUCH AS WONDERBOARD AND DUROCKETC.MAYBEUSEDINTHE SPACE BETWEEN THE UNIT AND THE FRAMING.

Regency Z2510 WarmHearth

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents WarmHearth Fireplace Regency Fireplace Product Table of Contents Copy of Safety Label for Z2510L Safety LabelOptions InstallationRegency Warmhearth Product DetailsImportant Please read and follow these rules for safety Dimensions and SpecificationsFireplace Enclosure Framing Clearances Height RequirementsThereafter and no stand-offs are required Location FireplaceHearth Extension Entire enclosure floor, wallCanada Chimney System ConsiderationsChimney Height Chase EnclosureInstallation Components Installing STAND-OFFSBefore YOU Start SET Warmhearth Into Position Installing Chimney SystemModel 1st Floor 2nd Floor into Attic Offset Chimney InstallationDo not use water, it will create a steam explosion Internal Blower with Thermo-Disc Installing Outside AIR KITWiring the Warmhearth Installing the Blower SystemsInternal and External Blowers With a Thermodisc Parts ListGravity AIR Feed KIT Option External Blower with Thermo-DiscMaterials Required Installing Your Central Heating SystemTypical Floor Register Masonry Retainer Kit Option Non-Self Supporting, Thin Veneer Facades InstallationFinishing Warmhearth Completing the FacingCompleting the Mantle Finishing DetailsExample Face of Fireplace Flush with Wall Sheathing Masonry Liner Bricks Latch AdjustmentGlass Installation Secondary AIR Tube InstallationSafety Guidelines MaintenanceMaintenance Parts LIST- Firebox & Body Parts ListParts LIST- BAFFLES, DOOR, Options Warranty Lifetime WarrantyInstaller Please complete the following information

Z2510L specifications

The Regency Wraps Z2510L is a standout product in the realm of kitchen essentials, designed with both functionality and aesthetics in mind. This versatile wrap features a range of characteristics that make it an ideal choice for culinary enthusiasts and professional chefs alike.

One of the main features of the Z2510L is its generous length, which measures 25 feet. This prolonged size allows users to wrap a variety of foods, from large cuts of meat to multiple servings of leftovers, without the hassle of using multiple pieces. The wrap's construction includes a durable, high-quality material that is not only strong and puncture-resistant but also maintains its elasticity when stored, ensuring longevity and reliability for repeated use.

In terms of technology, the Z2510L employs a unique non-stick surface that prevents food from sticking to the wrap, allowing for easy removal and presentation. This is particularly beneficial for delicate items such as pastries or roasted vegetables, ensuring that meals are served beautifully without compromising on taste or texture. Moreover, the wrap is microwave-safe, making it an excellent choice for reheating food without the risk of melting or chemical leaching, a common concern with lower-quality wraps.

Another characteristic that sets the Regency Wraps Z2510L apart is its ease of use. The roll is designed with a convenient dispenser that allows for controlled tearing, minimizing waste and maximizing efficiency in the kitchen. This thoughtful design feature is particularly advantageous in busy cooking environments where time is of the essence.

The Z2510L is also environmentally conscious, as it is made from materials that are biodegradable and free from harmful chemicals, appealing to eco-friendly consumers looking to reduce their environmental footprint.

In summary, the Regency Wraps Z2510L combines practicality, quality, and a commitment to sustainability, making it a must-have in any kitchen. Its standard features, user-friendly technology, and eco-conscious materials reflect a modern approach to food storage that meets the demands of today's consumers. Whether it's for wrapping, storing, or reheating, the Z2510L is engineered to uplift the culinary experience, ensuring that both home cooks and professional chefs have the best tools at their disposal.
Top Page Image Contents