Regency Wraps Z2510L Gravity AIR Feed KIT Option, External Blower with Thermo-Disc, Parts List

Page 14

INSTALLATION

OPTION 2

External Blower with Thermo-Disc

The thermodisc allows the fireplace to warm up properly before the blower will switch on. The blower is also switched off if the fireplace temperature falls below suitable heating levels.

ing the thermodisc to the fireplace. The holes are on the right hand side just below the ashlip.

(Fastens to louvers)

000-918 One-way Damper:

Eight inch diameter butterfly valve necessary for external blower installation.

The remainder of the components discussed here are optional and are available from your Regency dealer or local heating supply outlet. Below is the listed specifications required for these parts:

External Blower: 8 inch diameter inlet a mini- mum capacity of 433 CFM at a static pressure of 0.75 in.

w.c. and is listed in the coun-

try where the blower is to be used.

OPTION 3

Internal and External Blowers

with a Thermodisc

When both blowers are used the thermodisc should be connected to the external blower.

Note: There are two holes provided for attach-

FAN PART NUMBERS

The parts listed below are available from Re- gency. Please see your Regency Dealer for prices.

000-912 Internal Blower Assembly: Includes 150 CFM, 2 speed blow- er, Blower Switch Kit and Ther- mo-Disc Kit.

000-928 Blower Switch Kit:

Includes switch box, two way switch and a three way switch.

Wall Switch: 1 speed blower requires 2-way switch

2 speed blower requires

3-way switch etc.

Wall Thermostat: For both wall switch and thermostat see your Regen- cy dealer or heating supplier for compatible parts.

GRAVITY AIR FEED KIT OPTION

The Gravity Air Feed Kit is designed to extend the heat output vent above the WarmHearth or to the front or the side. The upper louver opening is blocked off and flex duct is

connected to the vent holes in the top of the unit and run to vent grills installed above the unit or to the side. Both 8" diameter insulated Flex pipes must be used along with the air vent to bring additional air into the chase.

Parts List

Qty.

1 Block-off plate 6-1/2" x 26"

4 Connector collars

4 Adjustable clamps

2 Upper air vent frame

2 5' lengths of flexible vent pipe (8" dia.)

2 Large upper vent covers

1 Small lower vent cover

1 Lower air vent frame

2 Insulation sleeves for flexible vent pipe

1) Remove the screws from both of the vent hole covers (Vent cover A) on top of the unit.

2) Take the connector collar and rotate it in the hole to cut through 4" of insulation. Remove the insulation from pipe.

3) Remove the screws on the lower cover (Vent cover B) and slide it back under the insulation.

4) Slide the connector collar into the flex duct and secure with an adjustable clamp.

14

Regency Z2510 WarmHearth

Image 14
Contents WarmHearth Fireplace Regency Fireplace Product Table of Contents Safety Label Copy of Safety Label for Z2510LProduct Details InstallationRegency Warmhearth OptionsDimensions and Specifications Important Please read and follow these rules for safetyClearances Height Requirements Fireplace Enclosure FramingEntire enclosure floor, wall Location FireplaceHearth Extension Thereafter and no stand-offs are requiredChase Enclosure Chimney System ConsiderationsChimney Height CanadaBefore YOU Start Installing STAND-OFFSInstallation Components Installing Chimney System SET Warmhearth Into PositionDo not use water, it will create a steam explosion Offset Chimney InstallationModel 1st Floor 2nd Floor into Attic Installing the Blower Systems Installing Outside AIR KITWiring the Warmhearth Internal Blower with Thermo-DiscExternal Blower with Thermo-Disc Parts ListGravity AIR Feed KIT Option Internal and External Blowers With a ThermodiscInstalling Your Central Heating System Materials RequiredTypical Floor Register Completing the Facing Non-Self Supporting, Thin Veneer Facades InstallationFinishing Warmhearth Masonry Retainer Kit OptionExample Face of Fireplace Flush with Wall Sheathing Finishing DetailsCompleting the Mantle Secondary AIR Tube Installation Latch AdjustmentGlass Installation Masonry Liner BricksMaintenance MaintenanceSafety Guidelines Parts List Parts LIST- Firebox & BodyParts LIST- BAFFLES, DOOR, Options Warranty Warranty LifetimeInstaller Please complete the following information

Z2510L specifications

The Regency Wraps Z2510L is a standout product in the realm of kitchen essentials, designed with both functionality and aesthetics in mind. This versatile wrap features a range of characteristics that make it an ideal choice for culinary enthusiasts and professional chefs alike.

One of the main features of the Z2510L is its generous length, which measures 25 feet. This prolonged size allows users to wrap a variety of foods, from large cuts of meat to multiple servings of leftovers, without the hassle of using multiple pieces. The wrap's construction includes a durable, high-quality material that is not only strong and puncture-resistant but also maintains its elasticity when stored, ensuring longevity and reliability for repeated use.

In terms of technology, the Z2510L employs a unique non-stick surface that prevents food from sticking to the wrap, allowing for easy removal and presentation. This is particularly beneficial for delicate items such as pastries or roasted vegetables, ensuring that meals are served beautifully without compromising on taste or texture. Moreover, the wrap is microwave-safe, making it an excellent choice for reheating food without the risk of melting or chemical leaching, a common concern with lower-quality wraps.

Another characteristic that sets the Regency Wraps Z2510L apart is its ease of use. The roll is designed with a convenient dispenser that allows for controlled tearing, minimizing waste and maximizing efficiency in the kitchen. This thoughtful design feature is particularly advantageous in busy cooking environments where time is of the essence.

The Z2510L is also environmentally conscious, as it is made from materials that are biodegradable and free from harmful chemicals, appealing to eco-friendly consumers looking to reduce their environmental footprint.

In summary, the Regency Wraps Z2510L combines practicality, quality, and a commitment to sustainability, making it a must-have in any kitchen. Its standard features, user-friendly technology, and eco-conscious materials reflect a modern approach to food storage that meets the demands of today's consumers. Whether it's for wrapping, storing, or reheating, the Z2510L is engineered to uplift the culinary experience, ensuring that both home cooks and professional chefs have the best tools at their disposal.