Minimum Alcove Clearance to Combustible Materials

INSTALLATION

Minimum Alcove Clearance to Combustible Materials

The Regency Freestanding models have been alcove approved and must be installed with a listed double wall connector to the ceiling level.

Note: Minimum alcove ceiling height - 84" (2134mm)

Maximum depth of alcove - 36" (914mm)

			From		From Flue		Min.	Min.Hearth
	Unit		Unit		Center-line		Width	to Rear Wall
		G		H	I	J	K	L

Medium F2402M	with Airmate	15" (381 mm)		5.5" (139 mm)	27" (685 mm)	12" (304 mm)	54" (1371 mm)	48" (1219 mm)
	with Rear Deﬂector	15" (381 mm)		6.5" (165 mm)	27" (685 mm)	13" (330 mm)	54" (1371 mm)	49" (1244 mm)

Floor Protection

A combustible ﬂ oor must be protected by non-combustible material (like tile, concrete board, or certiﬁ ed to UL-1618 or as deﬁ ned by local codes) extending beneath the heater and a minimum of 6" (152mm) from each side and minimum 16" (406mm) from the front face of the stove and minimum 6"

(152mm) (or the rear clearance to combustibles whichever is smaller) from the rear of the stove.

When installed with horizontal venting, non-combustible ﬂoor protection must beneath the ﬂ ue pipe and extend 2" (51mm) beyond each side.

Minimum Overall Width (X) of Floor

Protector for all installations:

Stove

F2402M

36" (914 mm)

NOTE: In Canada, ﬂoor protection must extend 18" (450mm) to the

front and 8" (200mm) to each side and back of the stove.

Minimum Overall Depth (Y) of Floor Protector

Residential

Mobile Home

Alcove

Unit

"C" Vent

Close Clearance

Medium F2402M

with Airmate

46" (1168 mm)

6" (152 mm)

45"* (1143 mm)

5" (127 mm)

45" (1143 mm)

5" (127 mm)

45"* (1143)

5" (127 mm)

with Rear Deﬂector

46" (1168 mm)

6" (152 mm)

45" (1143 mm)

5" (127 mm)

45" (1143 mm)

5" (127 mm)

45" (1143)

5" (127 mm)

*The rear clearance to combustibles is less than 6", for corner installations the rear corners may be angled to take advantage of the closer clear- ances.

8	Regency Freestanding Woodstove

INSTALLATION