Logitek Standard Elec. Cable Manufacturing C/A210 operation manual 775,212M REV. a 04/2007

Page 18

The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.

Consult your local distributor for fireplace code information.

P/N 775,212M REV. A 04/2007

1110 West Taft Avenue • Orange, CA 92865

Image 18

Contents EPA Certified Wood-Burning Fireplace Inserts Contents Testing Information General Safety PrecautionsNegative Pressure Warning Negative pressures described aboveDrafting CreosoteBreak-In Period Ash DisposalFuel Paint Curing= 4-1/2 x 5-1/2 C = 4-1/2 x 6-1/4 D = 3 x 6-1/4 Next, install the front baffle bricks #33-38 underBrick Installation Side View of the FireboxM9 229mm Required ClearancesSide view of optional mantel deflector shown Top ViewStove and it’s parts Installation Procedures- Masonry ChimneyBooklet Chimney RequirementsSee Required Clearances on Original conditionInstall the brick and baffle as per Post Installation ChecksBurn only dry, well-seasoned wood for maxi Burn wet wood or anything other than cleanAt all times except when loading wood Dry wood productsStarting and Maintaining a Fire Clean Glass Operating Techniques and HintsGetting the Most Out of Your Stove Achieving Clean, Long Burns Maximizing Your Stove’s Overall EfficiencyMaintenance Ventilate See Break-in Procedures on Add fuel at lower firebox temperaturesProcedures on Check draft See Poor Draft section aboveDo’s and Don’ts 775,212M REV. a 04/2007