Mantle Clearances, 11 ½ | Southwest Specialty Products 36, 48, 42

*Assemble side walls (bond beam up) to base and back wall assembly.

**Use carpenters square placed on the base {inside firebox} to ensure the walls are plumb and perpendicular to the floor of the firebox. Using 4’ level make sure the walls are level front to back & side

to side. Proceed with assembly of top section.

*Remember to moisten all mating (bonded) surfaces before applying adhesive.

**Take care to maintain firebox front opening dimensions (square & plumb) or any future installation of glass doors, Etc. will be difficult if not impossible.

C.TOP SECTION INSTALLATION

Apply refractory mortar to the top edges of the center section. with a liberal3” wide by ¼” thick trip of refractory mortar applied on the edges. Align with the back, sides and front of the center section.

WARNING! DO NOT BLOCK REQUIRED AIR SPACES

WITH INSULATION OR ANY OTHER MATERIAL.

DO NOT OBSTRUCT EFFECTIVE OPENING OF FIREPLACE

WITH ANY TYPE OF FACING MATERIAL.

COMBUSTIBLE MATERIAL MUST NOT BE IN CONTACT

WITH THE BLACK FRONT FACE OF THE FIREPLACE.

MANTLE CLEARANCES

Woodwork such as wood trims, mantles, and other combustible materials must be placed at least 6 inches away from the opening of the fireplace.

Combustible material above and projecting
more than 11 1/2 inches from the front face
of the fireplace must be placed at least 12
inches away from the fireplace opening.
(ref: NFPA std. 8-2.3.3).	33 o

11½”

33o

Mantles or any other combustible material	6” (side)	12”
also may come up to the side periphery of		12”
also may come up to the side periphery of
the face of the fireplace as long as the
projection from the front face falls within the
limits shown above.

GAS SUPPLY TESTING

NOTE: This section is intended as a guide for qualified technicians installing gas to this Unvented Fireplace.

DO NOT CONNECT UNVENTED FIREPLACE BEFORE PRESSURE TESTING GAS PIPING. DAMAGE TO GAS VALVE MAY RESULT AND AN UNSAFE CONDITION MAY BE CAUSED.

The appliance and it's individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa).

The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig

(3.5 kPa).

36, 42, 48 specifications

Southwest Specialty Products 48, 36, and 42 are innovative solutions designed to meet the diverse needs of various industries, including construction, manufacturing, and environmental management. These products showcase advanced technologies and practical features aimed at enhancing efficiency, safety, and performance in demanding environments.

One of the standout features of the 48, 36, and 42 models is their robust construction. Made from high-grade materials, these products offer exceptional durability, ensuring long-lasting performance even under the toughest conditions. They are resistant to corrosion, which is crucial for applications in harsh environments, thus reducing maintenance costs and increasing operational lifespan.

The 48, 36, and 42 models also incorporate cutting-edge technology to optimize functionality. For instance, they are equipped with advanced chemical compatibility, enabling users to safely use a wide range of substances without fear of degradation. This characteristic is particularly beneficial for industries that handle hazardous materials, as it promotes safety and allows for more versatile applications.

Another key technological advancement is the incorporation of user-friendly designs. These models feature ergonomic handles and intuitive controls, making them easy to operate. This is crucial in environments where time efficiency is essential, as users can quickly adapt and utilize the equipment without extensive training.

In terms of size and capacity, the 48, 36, and 42 models cater to various requirements, allowing customization based on specific project needs. This flexibility makes them an excellent choice for contractors, engineers, and facility managers who require reliable and scalable solutions.

Furthermore, environmental considerations are integral to the design of Southwest Specialty Products. The 48, 36, and 42 models are engineered with eco-friendly practices in mind, promoting sustainability while maintaining high performance levels. This commitment to the environment is increasingly important in today's market, where businesses are held accountable for their environmental footprint.

In conclusion, Southwest Specialty Products 48, 36, and 42 stand out due to their robust construction, advanced technology, user-friendly designs, and environmental consciousness. These features make them ideal choices for professionals seeking reliable, efficient, and safe solutions in various high-demand industries.