Description, Unpacking, Safety Guidelines | Wayne SSPTU50 instruction

Operating Instruction and Parts Manual	Pedestal Series

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Pedestal Sump

Pump

Description

The pedestal pump is designed for home sump applications. The unit is equipped with an 8-ft long, 3-prong grounding type power cord. Motor is air cooled; it is not designed to operate under water. A float switch is provided for automatic pump operation. This pump is not suitable for aquatic life.

Unpacking

Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for replacement. Failure to do so could result in serious injury or death. Some warning labels come affixed to the pump. Over time, these labels may fade. If this happens, contact Wayne Water Systems for a free replacement label.

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently

hazardous situation which, if not avoided, will result in death or serious injury.

Warning indicates a potentially

hazardous situation which, if not avoided, could result in death or serious injury.

Caution indicates a potentially hazardous

situation which, if not avoided, may result in minor or moderate injury.

Notice indicates important

information, that if not followed, may cause damage to equipment.

General Safety

Information

California proposition 65

This product or its power cord may

contain chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

General Safety Information

Read these rules and

instructions carefully. Failure

to follow these instructions MANUAL could cause serious bodily

injury and/or property damage.

Do not submerge motor or allow

motor to be exposed to water. Personal injury and/or death could result.

Do not use to

pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not

use in a flammable and/or explosive atmosphere. Pump should only be used to pump clear water. Personal injury and/or death could result.

This pump is not designed to handle

salt water, brine, laundry discharge or any other application which may contain caustic chemicals and/or foreign materials. Pump damage could occur if used in these applications and will void warranty.

All wiring must be performed by a

qualified electrician.

If the basement

has water or moisture on the floor, do not walk on wet area until all power is turned off. If

the shut-off box is in the basement, call an electrician to disconnect the power. Remove pump and either repair or replace. Failure to follow this warning could result in fatal electrical shock.

A battery backup system should be used. Please contact your local retailer

to order an emergency backup system.

Assembly

Always disconnect

the power source before attempting to install, service, relocate or maintain the pump.

Never touch sump pump, pump motor, water or discharge piping when pump is connected to electrical power. Never handle a pump or pump motor with wet hands or when standing on wet or damp surface or in water. Fatal electrical shock could occur.

Switch	GFCI Grounded
	Outlet
Grommet
	14 in.
	Dia.
Float Rod	Min.
Float Rod
Guide
	24 in.
	Min.
Float
Figure 1
FLOAT INSTALLATION SPV800, SPV500
& SSPTU50

1.To attach float for SPV800, SPV500 & SSPTU50. insert float rod through hole in switch lever.

2.Place rubber grommet on float rod in temporary position.

3.Slide float guide onto float rod.

4.Using pliers to hold the float rod, screw the float on.

5.Attach the float guide to pump halfway up the pumps stand and properly align with motor switch.

FLOAT INSTALLATION PTU30, PTU33A & PTU50

1.To attach float for PTU30, PTU33A, and PTU50 begin by sliding the float guide onto the open end of the float rod.

2.Next slide a grommet onto the open end of the float rod about ¼ of the way down.

3.Guide the open end of the float rod through the hole in the switch lever.

4.Place the second grommet onto the open end of the float rod, being sure to keep the float rod inserted into the switch lever.

5.Attach the float guide to pump halfway up the pumps stand and properly align with motor switch.

NOTE: For all replacement float kits installation will be the same as for SPV800, SPV500 & SSPTU50.

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

© 2009 Wayne Water Systems	For parts, product & service information	360516-001 9/09
	visit www.waynepumps.com

360516-001, SPV800, SPV500, SSPTU50, Pedestal Series specifications

The Wayne SPV800 and SSPTU50 models, along with the Pedestal Series and SPV500, form a comprehensive lineup of fuel dispensers renowned for their reliability and cutting-edge technologies. Designed specifically for retail fueling environments, these dispensers incorporate features that ensure efficient performance, safety, and user-friendly operation.

One of the standout features of the Wayne SPV800 is its advanced customer interface, which includes a high-resolution graphics display and intuitive touch screen functionality. This makes transactions smoother and provides customers with real-time information about fuel prices, promotional offers, and loyalty program details. Additionally, the SPV800 utilizes Wayne's innovative pumping technology, which enhances flow rates while maintaining precise measurement accuracy, ultimately improving customer satisfaction.

The SSPTU50 model, part of the same family, is engineered for versatility. It supports various payment methods, including contactless options, thereby catering to modern consumer preferences. Its robust construction ensures durability against harsh weather conditions, making it a reliable choice for outdoor installations. Furthermore, the SSPTU50 features advanced diagnostics capabilities that allow for quick troubleshooting and maintenance, significantly reducing downtime and enhancing operational efficiency.

Meanwhile, the Pedestal Series is known for its superior design tailored to high-volume fuel retail environments. Incorporating a compact and sleek profile, the Pedestal Series dispensers are space-efficient yet packed with powerful performance features. They are equipped with Wayne's proprietary fuel management systems, offering operators detailed reporting and analytics to optimize inventory management and operational efficiency.

The SPV500 model complements this lineup with its focus on fuel economy and sustainability. It incorporates eco-friendly technologies aimed at reducing emissions, aligning with industry trends towards greener solutions. The SPV500 also boasts advanced security features to protect users from fraud, including end-to-end encryption for all transaction data.

All models in this series emphasize user-friendly experiences. They incorporate LEDs for easy visibility and are straightforward to navigate, ensuring that customers can quickly complete fueling transactions without unnecessary delays.

Collectively, the Wayne SPV800, SSPTU50, Pedestal Series, SPV500, and 360516-001 represent state-of-the-art fuel dispensing solutions designed to meet the evolving needs of the retail fuel industry. With their combination of advanced features, technological integration, and focus on reliability and efficiency, these dispensers set a new standard for quality in fuel delivery.