Quantum 3214 HOW to Operate the Wireless Wall Station If Included, Opener Power Head Controls

Page 25

HOW TO OPERATE THE WIRELESS WALL STATION (If Included)

Never let children operate or play with door controls.

Keep remote control away from children.

The Wireless Wall Station Provides the Following Features:

1.Momentarily pressing the UP/DOWN button activates the door. An open door will close and a closed door will open.

2.Momentarily pressing the LIGHT button will toggle the overhead light on and off. The light will remain on until it is turned off by another LIGHT button press or the door is activated. The overhead light turns on automatically with door activation and will turn off automatically after a 4 minute delay.

3.Momentarily pressing the Timer button activates a 10 second exit delay. The overhead light will flash on and off for 10 seconds. After the 10 second delay the door will close. The exit delay feature works only when the door is in the up position.

4.Pressing the PET LOCK button opens a closed door to a preset position between eight and thirty inches above the floor, allowing pets to enter and exit the garage without the door being fully open. The door must be fully closed to activate the pet open feature. Pressing the PET LOCK button while the door is in the pet position will cause the door to close. Pressing the UP/DOWN button while the door is in the pet position will cause the door to open. NOTE: a door in the pet position is not locked and should not be used as a secured door position.

5.The wall station PROGRAM button has several functions.

a.It can be used to set a custom pet position. (see below)

b.It can be used to set the opener’s closing force (See Adjustment #1 Page 21).

To set a custom pet position, start with the door in the closed position.

1.Operate the door then stop it at the desired height. If desired height is not achieved, the door must be re- turned to the closed position.

2.Press the wall station PROGRAM button until the LED turns on solid (5 sec.), or the opener power head PROGRAM SWITCH button two times. The STATUS light on the power head unit and the overhead light will flash on and off at a normal rate.

3.Press the PET POSITION button. The STATUS light on the power head and the overhead light will flash on and off three times indicating successful programming.

OPENER POWER HEAD CONTROLS

The PROGRAM SWITCH located in the opener power head has several functions.

1.Pressing the PROGRAM SWITCH button once, will make the STATUS light and overhead lamp turn on solid. This mode allows programming of Transmitters, Wireless Keyless Entry, and Wireless Wall Stations (see pages 14, 17, and 20).

2.Pressing the PROGRAM SWITCH button two times will make the STATUS light and overhead lamp blink on and off. This mode allows programming of a custom pet position (see above).

3.Pressing the PROGRAM SWITCH button three times will make the STATUS light and overhead lamp blink on and off with a long pause at each blink cycle. This mode allows programming of the opening force (see page 21).

4.Pressing and holding the PROGRAM SWITCH button for 10 seconds

will erase all transmitters from memory. The STATUS light and overhead light will flash 3 times indicating a suc- cessful erase operation.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Owner Installation Important Installation Instructions Page Features Important PRE-ASSEMBLY Check Positioning and Installing Front Wall Bracket Attaching Motor Power Head Unit to RailPositioning the Motor End of Operator Attach Unit to Front Wall BracketMounting Motor End of Opener Installing Wired Wall Station if included Installing LightMounting Door Bracket Install Entrapment Warning Label Installing Deluxe Wireless Wall Station if includedInstall Wireless Infrared Safety Sensor Install Wireless Infrared Safety Sensor BracketInstall Wired Infrared Safety Sensor Wall Mounting Brackets Connecting Wired Infrared Safety Sensor to Opener Install Wiring for Wired Infrared Safety SensorConnecting Electrical Power Mount Wired Infrared Safety SensorsChanging Wireless Wall Station Code Wireless Wall Station Security Code Change and ProgrammingAlignment of the Wireless Infrared Safety Sensors Transmitter Security Code Change and Programming Alignment of the Wired Infrared Safety SensorsSetting Trolley Close Position Connecting Cushion Arm to TrolleyIMPORTANT! Test Contact Obstruction Sensing Feature Connecting Door Arm to DoorInfrared Safety Sensor Obstruction Test Setting Door Opening TravelInstalling Wireless Keyless Entry If Included Programming Wireless Keyless Entry If IncludedAdjustment # 1 Opening and Closing Force AdjustmentsAdjustment # 3 Positive Mechanical Door Lock Adjustment # 2 Contact Obstruction Sensing Closing DirectionImportant Safety Instructions Operation of Your Opener HOW to Operate the Wireless Keyless Entry if IncludedOpener Power Head Controls HOW to Operate the Wireless Wall Station If IncludedPage Twice a Year Once a MonthOnce a Year Trouble Shooting Section Parts Breakdown Rail Assembly All Models Parts Breakdown Power Head Assembly All Models Quantum Accessories Cut Template to Aid in Keyless Entry Installation See Step Limited Lifetime Warranty

3316, 3314, 3214, 3414 specifications

Quantum 3414, 3316, 3214, and 3314 represent a series of cutting-edge technologies that have emerged in the field of quantum computing and advanced materials science. Each of these models offers unique features and capabilities designed to push the boundaries of computational power and efficiency.

The Quantum 3414 is distinguished by its robust architecture and high-performance qubit system. It utilizes superconducting qubits, which provide exceptional coherence times and operational fidelity. This model is particularly well-suited for complex algorithm implementations, making it an attractive choice for researchers focused on quantum simulations and machine learning applications. Its innovative design integrates quantum error correction mechanisms that enhance reliability and reduce error rates.

Following closely, the Quantum 3316 emphasizes versatility and scalability. This model introduces a modular approach to quantum systems, enabling users to expand their computational resources as their needs grow. It features a hybrid quantum-classical architecture, allowing for greater flexibility in algorithm execution while leveraging classical computing's strengths. The 3316 is ideal for industries looking to optimize operational efficiency through quantum-enhanced processes.

The Quantum 3214 focuses on user accessibility and simplified integration into existing technological ecosystems. This model is equipped with an intuitive interface and user-friendly programming capabilities, catering to both seasoned quantum developers and newcomers. The 3214 also adopts cutting-edge quantum networking technologies, facilitating the remote connection of quantum systems for collaborative research and development.

Lastly, the Quantum 3314 combines power and compactness. Though smaller in form factor, this model does not compromise on performance. It employs advanced cryogenic technology to maintain optimal operating conditions for qubits, thus enhancing thermal stability and minimizing noise. The 3314 is particularly suitable for environments where space is limited yet high performance is essential, such as academic laboratories and research institutions.

Overall, the Quantum 3414, 3316, 3214, and 3314 each present a variety of sophisticated features tailored to specific applications within the quantum domain. From research and development to practical industrial applications, these models signify a significant leap forward in harnessing quantum technologies for future advancements. Their unique characteristics make them valuable tools for overcoming the challenges faced in the ever-evolving landscape of computing and science.
Top Page Image Contents