Quasar HQ-2081TH manual Installation Kit Contents Suggested Tool Requirements

Installation Kit Contents

1	2	3	4
5	6	7	8	13
12				10
11	9
14

Suggested Tool Requirements

NO.	NAME OF PARTS	Q'TY
1	FRAME CURTAIN	2
2	SILL SUPPORT	2
3	BOLT	2
4	NUT	2
5	SCREW(TYPE A) (10mm(2/5"))	16
6	SCREW(TYPE B) 16mm(0.63")D5.1mm(0.2")	3
7	SCREW(TYPE C) 16mm(0.63")D4.1mm(0.17")	5
8	FOAM-STRIP	1
9	UPPER GUIDE	1
10	FOAM-PE (466mm x 10mm x 2mm)	1
11	FRAME GUIDE	2
12	WINDOW LOCKING BRACKET	1
13	FOAM-PE (920mm x 30mm x 2mm)	1
14	DRAIN PIPE	1

SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL

Features and Installation

PREPARATION OF CHASSIS

1.Remove the screws which fasten the cabinet at both sides and at the back.

2.Slide the unit from the cabinet by gripping the base pan handle and pulling while bracing the cabinet.

3.Cut the window sash seal to the proper length.

Peel off the backing and attach the FOAM-PE

to the underside of the window sash.

4.Remove the backing from the top upper guide

FOAM-PE and attach it to the bottom of the upper guide

5.Attach the upper guide onto the top of the cabinet with 3 type A screws.

6.Insert the frame guides into the bottom of the cabinet.

7.Insert the Frame Curtain into the upper guide and frame guides .

8.Fasten the curtains to the unit with 4 Type A screws.

13

(Type A) 9

5

5

Shipping

Screws

9

10

11

5

10 11 (Type A)