Assembling cleaner
It is extremely important to read and follow all instruction steps in order.
The assembled cleaner will look like this drawing.
Carton contents
1
A B
D
G
C
H
E
A. Upper handle
B. Lower handle
C.Cord
D.Tool rack
E.Outer bag
F.Cleaner body
G.Handle bolt and nut packet (One extra nut included)
H. Filter bag
I. Hose, cleaning tools and wand
FI
Remove all parts from carton and identify each item shown.
Make sure all parts, especially small items, such as G, are located before disposing of cardboard packing.
Step 1 Assemble handle
2 | A |
| A |
D |
| C | B |
|
|
Place upper (B) and lower (C) handle sections on a flat sur- face with cord hooks (A) on top. With hands on sides of han- dle sections, push handle sections together firmly until they “click” into place.
*Do not press against the rod (D) extending from the lower handle. If the rod breaks or bends, the cleaner will not work properly. Do not push handle together with your hands on the ends of the sections.
2