How to use
Cleaner description
27 | 1 |
|
|
| |
|
| 2 |
| 2 |
|
|
| 15 |
| 3 | |
|
| 14 |
14 |
| 4 |
|
| 16 |
| 5 | 4 |
|
| |
13 |
|
|
| 6 | 18 |
|
| 2 |
12 |
| 17 |
| 8 | |
11 |
| 9 |
|
| |
| 10 | 7 |
The assembled cleaner will look like the drawing.
1.Handle
2.Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for
easy cord release.
3.Bag Cap
4.ON/OFF switch: located on side of handle
5.Outer bag
6.Stair cleaning handle: located on lower edge of bag.
7.Handle release lever: step on lever to lower handle to operating or low position.
8.Cleaner body
9.Nozzle control knob: slide knob to correct setting for height of car- pet being cleaned.
10.Furniture guard: helps prevent cleaner from marking furniture.
11.Hood
12.Hose door: open door to connect hose to cleaner.
13.Hose
14.Tool rack
15.Dusting brush
16.Wand
17.Furniture nozzle
18.Crevice tool
Operate cleaner only at voltage specified on data plate on bottom of cleaner.
Note: To reduce the risk of electric shock, this appliance has a polar- ized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
28 |
To turn cleaner on, push switch up. To turn cleaner off, push switch down.
Plug cord into electrical outlet. Turn cleaner on and, with handle in upright position, pull back on handle until front of cleaner is lifted off the carpet. This insures that the paper bag is inflated.
29 |
Handle positions
The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle.
6