Paradox Hellas S.A EVO48, EVO192 manual Deleting User Access Codes, Programming User Access Codes

LCD LED

LCD LED

Table 3: Special Characters Catalogue

032	048	064	080	096	112	128	144	160		176	192		208	224	240
033	049	065	081	097	113	129	145	161		177	193		209	225	241
034	050	066	082	098	114	130	146	162		178	194		210	226	242
035	051	067	083	099	115	131	147	163		179	195		211	227	243
036	052	068	084	100	116	132	148	164		180	196		212	228	244
037	053	A069	085	101	117	133	149	165		181	197		213	229	245
038	054	070	086	102	118	134	150	166		182	198		214	230	246
039	055	071	087	103	119	135	151	167		183	199		215	231	247
040	056	072	088	104	120	136	152	168		184	200		216	232	248
041	057	073	089	105	121	137	153	169		185	201		217	233	249
042	058	074	090	106	122	138	154	170		186	202		218	234	250
043	059	075	091	107	123	139	155	171		187	203		219	235	251
044	060	076	092	108	124	140	156	172		188	204		220	236	252
045	061	077	093	109	125	141	157	173		189	205		221	237	253
046	062	078	094	110	126	142	158	174		190	206		222	238	254
047	063	079	095	111	127	143	159	175		191	207		223	239	255
		Polish		001	002	003	004		005	006		007
				001	002	003

Hungarian

001

Turkish

7.4Deleting User Access Codes

To delete user access codes, follow steps 1 to 4 in section 7.5.1 on page 14, but press the [CLEAR] button in Step 4. Once the information is erased, press the [ENTER] button to save and exit.

7.5Programming User Access Codes

The System Master and Users with the Master feature can program user access codes with User Options and Area Assignments. The section 7.5.1 on page 14 describes the steps you would follow to program user access codes. If you wish to program user access codes using the NEware Software, please contact your installer for information.

If the keypad emits a rejection beep at any point during the programming procedure, you may have chosen an existing user code or you do not have access to certain User Options (section 7.6) and Area Assignments (step 7 in section 7.5.1 on page 14). Users with the Master feature can only assign User Options and Area Assignments that they are assigned to. For example, if a User with the Master feature is assigned User Option 1 and Area 2, they can only assign Option 1 and Area 2 to a user access code.

EVO Systems 13