Paradox Hellas S.A EVO192, EVO48 manual Event Record Display, Group 8 Clock Loss

Page 22

LCD

9.1.6Group 8: Clock Loss

The time and date have been reset to the default. This is the only trouble that we recommend that you correct. Clock Loss [8] to Set will appear on the LCD screen after you press the [TRBL] button or the [] key. Refer to section 10.4 on page 21 to set the time and date.

9.2Event Record Display

The Event Record Display will record the user-initiated actions that occurred in your system as well as any alarms or troubles (i.e. “Access Granted”). You will only be able to view the events that occurred in the area(s) assigned to your user access code.

-Only available on LCD keypads.

To view the Event Record:

1. Enter your [ACCESS CODE].

2. Press the [7] button.

3. If you have access to more than one area, select the area(s) you wish to view.

4. Use the [S] and [T] buttons to scroll between the events.

5. Press the [CLEAR] button to exit.

Once you have entered Event Record Display mode, you can change the order that the Event Record screens appear by pressing the [7] button. If you already know the number of the event you want to view, press the [MEM] button after step 3 above, and then enter the event's number.

20 User Guide

Image 22

Contents User Guide Page Table of Contents Introduction User GuideBasic Operation EVO SystemsConfidential Mode Auditory Feedback Beep TonesOther Indicators Full/Force Arming IndicatorsStay/Sleep Arming Indicators MG-REM2 FeedbackPartitioned System Area DisplayArming One-Touch Buttons Keyswitch ArmingBypass Recall One Touch ButtonTimed Auto-Arming Auto-ArmingNo Movement Auto-Arming Disarming Entry Delay TimerAlarm Memory Display Disarming an Armed SystemCopy User Options Access CodesSystem Master Code Default User LabelsKey Press Key Once Keypad ButtonsSpecial Function Keys Stay = Insert Space Deleting User Access Codes Programming User Access CodesProgramming User Settings Access Control User Options User OptionsOptions 4 and 5 Arming with Card Arming and Disarming with Card Using Access ControlEntering & Exiting Arming with CardHow Access Control Works Example aTrouble Display Trouble DisplayEvent Record Display Group 8 Clock LossModifying illumination settings on the DGP2-648BL LED Additional FeaturesKeypad Settings Setting Time & DateProgramming Chime Zones Panic AlarmsQuick Function Buttons VDMP3 Plug-In Voice Dialer Receiving a Call From the VDMP3 alarm in systemCalling the VDMP3 outside line User Guide 12.2 Fire Alarm Testing Testing and MaintenanceBurglar Alarm Testing 12.3 System MaintenanceFire Safety Tips Fire and Burglar AlarmsDelayed Fire Zone Standard Fire ZoneMinimizing Home Fire Hazards Burglar AlarmHome Fire Warning System Appendix 1 Hebrew Special Characters Appendix 2 Russian Special Characters Appendix 3 Greek Special Characters Key Press key once Press key twice Press key three TimesIndex Arming with CardAccess Control, see Access Control User Options Warranty Limitations of Alarm SystemsEVO-EU02