LED
LCD LED
LCD LED
LCD LED
On the
1.Enter your [ACCESS CODE] and press the [TRBL] button.
2.Press the [8] button.
3.Enter the hour and minutes according to the
4.Enter the correct date according to yyyy/mm/dd.
5.Press [CLEAR].
10.5Programming Chime Zones
You can program the keypad to emit a rapid, intermittent beep tone whenever designated zones are opened or only when opened between certain hours. These zones are referred to as Chime Zones. Your installer can also program your Chime zones to beep upon closure.
How do I program chime zones?
1.Enter your [ACCESS CODE].
2.Press the [9] key.
3.Press the [1] key to chime a zone. Enter the number corresponding to the zone to be chimed, or use the [S] and [T] buttons to scroll the list of zones. Press the [ACC] button to chime or unchime the zone that appears on the screen. Press [ENTER] to save.
OR
Press the [2] button to set the time period a chimed zone will beep. Enter the time that the chimed zone(s) will start beeping when opened (HH:MM). Enter the time that the chimed zone(s) will stop beeping when opened (HH:MM).
4.Press [CLEAR] to exit chime programming.
10.6Panic Alarms
Your system can be programmed to send an alarm to your monitoring station to request help from the police, a medical facility, the fire department, or anyone you wish when you press a predetermined combination of buttons. To generate a panic alarm, simultaneously press and hold the button combinations displayed in Table 4 on page 22. Your installer can program the alarm to be either silent or audible.
| Table 4: Panic Buttons | |
Panic Alarm Types |
| Buttons to be pressed and held |
| simultaneously | |
|
| |
Emergency Panic |
| Press & hold the [1] and [3] buttons |
Auxiliary Panic |
| Press & hold the [4] and [6] buttons |
Fire Panic |
| Press & hold the [7] and [9] buttons |
10.7Quick Function Buttons
You will only need to use the Quick Function Buttons upon your installer’s or monitoring station's request. Only the System Master Code or user access codes with the Master feature enabled will be able to access these functions.
To access the Quick Function Buttons:
1.Enter your [ACCESS CODE]
2.Press the [0] button.
3.Press the:
[STAY] to send a test report to the monitoring station. [FORCE] to call the WinLoad software.
[ARM] to answer the WinLoad software.
[DISARM] to cancel communication with the WinLoad software.