Nortel Networks BCM 1000 manual To create user accounts, Add Account attributes

Appendix E Using Element Manager to set the basic parameters 55

To create user accounts

1From the Configuration tab, click the Administrator Access folder to expand it.

2Select Accounts and Privileges from the Administrator Access folder.

3Select the View by Accounts tab.

4Click Add... to add a user account. The Add Account dialog box opens.

5Configure the Add Account attributes (see Table 15).

Table 15 Add Account attributes

Attribute	Description
Description	Enter a description for this account.
User ID	Enter a descriptive name for the user or the user function.
Password	Enter a password for this account.
Telset user ID (numeric)	If the user performs administration through the Telset interface, enter a
	number for the user ID.
Telset password (numeric)	Enter a password for the Telset User ID.
Modem Callback Number	If Callback is required, enter the number to which the system calls back in
	order to verify the dial-up user access.
Modem Callback Passcode	This is the code the system uses to confirm the callback is legitimate.
ISDN Callback Number	If ISDN Callback is required, enter the number to which the system calls back
	in order to verify the dial-up user access.
ISDN Callback Passcode	This is the code the system uses to confirm that the ISDN callback is
	legitimate.
Change Password On	Select this checkbox to force the user to change the password upon first login.
Login
Change Password On	Select this checkbox to force the user to change the Telset password upon
Login Telset	first login.

6Click Ok.

7Repeat steps 4 to 6 to create more user accounts.

Next step

After you set the basic parameters, proceed to “Completing the initial installation (optional)” on page 57.

BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum