MAIN BRUSH REPLACEMENT
Warning: the following operations must be done with the machine in Off condition and master key out.
This machine is equipped with an automatic control of the main brush pressure; this also means that the position of the main brush is automatically adjusted (no need of manual adjustment).
|
The complete wear out of the main brush - and therefore the need to replace it - is notified with code 800 on the display.
Please meet the following procedure for the main brush replacement.
Open the side door on the right side of the machine, unscrewing the knob shown in the figure.
Remove the three knobs used to fix the lid of the main brush compartment.
Remove the lid.
15