Nilfisk-Advance America SR 5110 P/B manual Maintenance Brakes Adjustment, Front Lamp Replacement

Page 22

MAINTENANCE

BRAKES ADJUSTMENT

When the pedal brake and/or the parking brake reach a low efficiency operation some adjustments can be done on the front wheel (models SR 1100 e SR 5110):

-loosen the locking nut A

-turn adjuster B

-tighten locking nut A.

On models SR 1200 and SR 5120 the two brakes on the rear wheels can also be adjusted, by means of the regulating devices located under the foot board (under the brake pedal).

S31NUK5120(3)2001-04

B

A

FRONT LAMP REPLACEMENT

In order to replace the front lamp:

- remove the transparent cover

-push the lamp and turn it counter-clockwise to remove it

-replace the lamp paying attention to the volt and watt ratings

- fit the transparent cover.

20

Image 22

Contents Sweeper Index S31NUK512032001-04Spare Parts and Maintenance Introduction / General InformationUnpacking Technical Data VersionDescription of Commands Control PanelPreliminary Operations Preliminary Operations Connect the battery connector to the machine USE START/STOP of the Petrol EngineUSE USE of the Working Programs USE USE USE Further Performances Machine with Petrol Engine Side Brushes Adjustment and Replacement Main Brush Replacement Main Brush Replacement Filter Cleaning and Replacement Filter Cleaning and Replacement Maintenance Batteries Control and Recharge Maintenance Brakes Adjustment Front Lamp ReplacementMaintenance of the Petrol Engine Honda Maintenance of the Petrol EngineMaintenance Summary of Maintenance Controls battery versionControls petrol version Optional Items Safety Functions and TROUBLE- Shooting To Push To Drive See Safety CodeService Address AustraliaNilﬁsk-Advance Italia S.p.A