Nilfisk-Advance America IVB 3-M, IVB 5-M Precautions and safety regu- lations when using the vacu

Page 5

Precautions and safety regu- lations when using the vacu-

 

 

 

 

 

 

 

 

 

 

 

 

Dust Class M (medium).

tested in its entirety by vacuums

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The dusts which belong

for this dust class. The maximum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to this class are: dusts

degree of permeability is 0.1%

 

 

 

 

 

 

 

 

 

 

 

 

with OEL values > 0.1 mg/m³ as

and the disposal must be low

well as saw dust. The machine is

dust.

Before start-up

Electrical components

IVB 3-M IVB 5-M IVB 7-M

english

um cleaner

Inspect power cord regularly to detect signs of damage, e.g. cracks or ageing.

If the power cord is damaged, it must be replaced by Nilfisk Advance Service or an electri- cian to avoid danger before use of the vacuum cleaner is continued.

Use only the type of power cord specified in the operating manual.

Do not damage the power cord (e.g. by moving over it or pulling or crushing it).

Disconnect the power cord by pulling the plug only (do not pull or tug the power cord).

Inspect the vacuum cleaners to ensure that they are in proper condition. Plugs and couplings in power cords must at least have splash protection.

Never use the vacuum cleaner if the filter element is damaged.

Picking up liquids

If foam develops or liquid emerges, stop work immediately and empty the dirt tank.

Regularly clean the built in float (IVB 3-M) and level indicator hose (IVB 5-M/7-M) to limit the water level and check that they are not damaged.

See section 5 for information on handling liquids and (hazard- ous) dust.

Check the rated voltage of the vacuum cleaner before con- necting it to the mains supply system. Ensure that the voltage shown on the rating plate cor- responds to the voltage of the local mains power supply.

If you are using an extension cord, use only those specified by the manufacturer or higher quality ones (see section 9.4 „Technical data“).

It is recommended that the vacuum cleaner should be con- nected via a residual current circuit breaker. This stops the supply of electricity if the leak- age current to earth exceeds 30 mA for 30 ms or it has an earth tester circuit.

When using an extension lead, check the minimum cross-sec- tions of the cable:

Cable length

Cross section

m

 

 

<16 A

<25 A

 

 

 

 

up to 20 m

ø1.5mm²

ø2.5mm²

 

 

 

20 to 50 m

ø2.5mm²

ø4.0mm²

 

 

 

Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection class is maintained.

Never spray water on to the upper section of the vacuum cleaner. Danger for persons, risk or short-circuiting.

Observe the latest edition of the IEC regulations.

1) Option depending on model

03

Page 4 Page 6
Image 5
Page 4 Page 6
Contents IVB 3-M/5-M/7-M IVB 3-M Contents Symbols used to mark English 1 Important safety instructionsFor your own safety TransportUm cleaner Precautions and safety regu- lations when using the vacuBefore start-up Electrical components Picking up liquidsDescription Operation Before start-upAppliance is switched off Connecting electricalSwitching on the vacuum cleaner Switch position Switch position „autoAcoustic warning Cleaning the filter element IVB 3-MCleaning the filter element IVB 5-M/7-M IVB 3-M English 5 Applications and techniquesPicking up liquids Do not pick up flammable substances Switching the vacuum Cleaner off and storageAfter finishing work Maintenance plan After finishing work As required MaintenanceMaintenance work 7.2.1 Replacing the waste Bag IVB 3-M/5-MEmptying the dirt tank IVB 7-M Replacing the filter bagEmptying dirt tank IVB 3-M/5-M Replacing filter element IVB 5-M/7-M Never use the vacuum cleaner without a filterReplacing filter element IVB 3-M Fault Cause Remedy TroubleshootingFurther information CleanerGuarantee EC declaration of conformity Technical dataOptional Accessories

IVB 3-M, IVB 7-M, IVB 5-M specifications

Nilfisk-Advance is renowned for its innovation and quality in the cleaning industry, and the IVB series, which includes the IVB 7-M, IVB 5-M, and IVB 3-M, exemplifies this commitment to excellence. These industrial vacuum cleaners are specifically designed to meet the diverse needs of various industrial applications, offering powerful suction and advanced technology in compact and ergonomic designs.

The IVB 7-M model is particularly notable for its robust construction and efficient performance. It features a high-capacity motor that delivers exceptional suction power, making it ideal for heavy-duty cleaning tasks in industrial environments. The unit is equipped with a durable filter system that captures fine dust and particulates, ensuring a cleaner workspace. The practical design includes a large capacity collection container, allowing for longer operating times between emptying.

The IVB 5-M offers a balance of power and portability. This model retains the high-performance motor found in its larger counterpart while being lightweight and easy to maneuver. The compact design allows it to fit effortlessly into tight spaces, making it an excellent choice for varied cleaning applications. The filter is designed for easy access and maintenance, ensuring that users can keep the vacuum operating at peak efficiency without extensive downtime.

On the other hand, the IVB 3-M is the most compact model in the series, tailored for smaller jobs or areas requiring meticulous cleaning. Despite its size, it does not compromise on performance. Equipped with the same high-efficiency filters, it can handle fine dust and debris effectively. The IVB 3-M is particularly user-friendly, featuring ergonomic handles and a streamlined design that promotes ease of use, even during extended periods of operation.

All three models incorporate advanced sound-reduction technology, making them suitable for use in noise-sensitive environments, ensuring that operators can work without disturbing others. Nilfisk has also implemented practical features across the IVB series, including automatic filter cleaning systems, which prolong filter life and maintain optimal suction.

In summary, the Nilfisk-Advance IVB series embodies a commitment to durable, efficient, and user-friendly cleaning solutions, making them ideal choices for various industrial settings. Their combination of power, technology, and ergonomic design ensures that they meet the demanding needs of modern cleaning applications, setting benchmarks in the industry.
Top Page Image Contents