To Change Oil

Drain the engine oil when the engine is warm. Warm oil drains quickly and completely.

1.Turn the fuel valve to the OFF position, 1/4 turn clockwise.

2.Place a suitable container next to the engine to catch the used oil.

3.Remove filler cap/dipstick and drain the oil into the container by tipping the engine toward the oil filler neck.

Oil Filler Neck

Oil Filler

Cap/Dipstick

Upper Limit

Lower Limit

NOTE: Please dispose of used motor oil in a manner that is compatible with the environment. It is recommended to take used oil in a sealed container to your local recycling center or service station for reclamation. Do not throw it in the trash or pour it on the ground or down a drain.

4.With the engine in a level position, fill to the upper limit mark on the dipstick with SAE 10W-30 oil. Engine oil capacity is 0.58 quart (.055 liter). NOTE: Other viscosities shown in the chart in the "To Check Oil" paragraph may be used.

5.Replace the oil filler cap/dipstick securely.

Air Cleaner

A dirty air cleaner will restrict air flow to the carburetor and cause poor engine performance. Inspect the filter each time the engine is operated. Clean the filter more frequently if the engine is operated in very dusty areas.

NOTICE: Operating the engine without a filter, will allow dirt to enter the engine, causing rapid engine wear. This type of damage is not covered under the warranty.

Inspect

1.Press the latch tabs on the top of the air cleaner cover and remove the cover. Check the filter to be sure it is clean and in good condition.

2.Reinstall the filter and air cleaner cover.

 

Air Cleaner Body

 

Filter

Air

 

 

 

 

 

Cleaner

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cover

 

 

 

 

 

Latch

 

 

 

 

 

Tabs

 

 

 

 

 

Lower

Air

Duct

Tabs

 

 

 

 

 

 

 

Cleaning

1.Tap the filter several times on a hard surface to remove dirt or blow compressed air not exceeding 30 psi (207kPa, 1.2 kg/cm2 ) through the filter from the clean side that faces the engine. Never try to brush off dirt. Brushing will force dirt into the fibers.

2.Wipe dirt from the air cleaner body and cover using a moist rag. Be careful to prevent dirt from entering the air duct that leads to the carburetor.

15- ENG

A04549

Page 14 Page 16
Page 15
Image 15
Craftsman 919.769063 owner manual To Change Oil, Inspect, Cleaning
Page 14 Page 16

919.769063 specifications

The Craftsman 919.769063 is a versatile air compressor that stands as a preferred choice for both DIY enthusiasts and professional contractors alike. Known for its reliability and robust performance, this compressor is designed to handle a variety of tasks, from inflating tires to powering nail guns and spray painting.

One of the main features of the Craftsman 919.769063 is its powerful motor, which typically operates at a horsepower rating of 1.5. This ensures that the compressor can deliver a high volume of air, making it suitable for demanding applications. The compressor’s tank usually has a capacity of around 6 gallons, which allows for extended use without the need for frequent refilling. This balance of power and tank capacity is ideal for both small-scale and larger projects.

The unit is equipped with a direct-drive pump that enhances its efficiency while reducing the maintenance needs. The oil-free design further adds to its appeal, as it eliminates the hassle of regular oil changes, making it a user-friendly option for those new to air compressors. The air compressor typically features a quick-connect air outlet, allowing users to easily switch between different tools and attachments, streamlining productivity during usage.

In terms of portability, the Craftsman 919.769063 is designed with a lightweight frame and integrated handle, making it easy to transport around job sites or within your home. Its compact design ensures that it can fit comfortably in tight workspaces or garages without taking up too much room.

The compressor usually features a control panel with understandable gauges that display pressure levels and an easy-to-use regulator. This feature allows users to customize the air pressure output according to the specific requirements of their tools, enhancing efficiency and performance.

Furthermore, the Craftsman 919.769063 typically includes safety features such as thermal overload protection, which prevents the motor from overheating, ensuring the longevity and safety of the unit.

In conclusion, the Craftsman 919.769063 is a well-rounded air compressor known for its power, portability, and ease of use. With its blend of advanced technologies and user-friendly characteristics, it remains a valuable asset for anyone needing reliable air power for various tasks. Whether you're a seasoned contractor or a home improvement novice, this air compressor can meet a wide range of pneumatic needs effectively.
Top Page Image Contents