PRESSURE WASHER

TERMINOLOGY

PSI: Pounds per Square Inch. The unit of measure for water pressure. Also used for air pressure, hydraulic pressure, etc.

GPM: Gallons Per Minute. The unit of measure for the flow rate of water.

CU: Cleaning Units. GPM multiplied by PSI. GPM x PSI = CU

Bypass Mode: Allows water to re-circulate within pump when the gun trigger is not pulled.

Allowing the unit to run for more than

two minutes without the gun trigger pulled could cause overheating and damage to the pump.

Chemical Injection System: Mixes cleaners or cleaning solvents with the water to improve cleaning effectiveness.

Water Supply: All pressure washers must have a source of water. The minimum requirements for a water supply are 20 PSI and 5 gallons per minute.

HOW TO USE

IMPORTANT: Read and understand how to use the pressure washer before operating.

TO ADJUST PRESSURE

The pressure setting is preset at the factory to achieve optimum pressure and cleaning. If you need to lower the pressure, it can be accomplished by these methods.

1.Back away from the surface to be cleaned. The further away you are, the less the pressure will be on the surface to be cleaned.

2.Rotate the nozzle at the end of the multi-adjustable spray wand to widen the fan spray. The wider fan spray will minimize the pressure on the surface to be cleaned.

DO NOT attempt to increase pump

pressure. A higher pressure setting than the factory set pressure may damage pump.

HOW TO USE SPRAY WAND

Your pressure washer is equipped with a multi-adjustable spray wand with both high and low pressure settings. The high pressure setting is for cleaning and rinsing, the low pressure setting is for applying chemicals or cleaning solutions to surfaces.

When using the high pressure setting, DO NOT allow the jet-like spray to come

in contact with unprotected skin, eyes, or with any pets or animals. Serious injury can occur.

Risk of injection or injury to person. DO

NOT direct discharge stream toward persons.

For high pressure operation, pull back the nozzle of the multi-adjustable spray wand as shown.

high pressure

The nozzle at the end of the multi- adjustable spray wand can be rotated to change the high pressure spray pattern from a 0º pencil stream to a 40º fan spray, as shown. Markings have been placed on the nozzle to help you select the spray pattern.

40º fan spray

 

0º pencil stream

A04549

10- ENG

Page 9 Page 11
Page 10
Image 10
Craftsman 919.769063 owner manual To Adjust Pressure, HOW to USE Spray Wand
Page 9 Page 11

919.769063 specifications

The Craftsman 919.769063 is a versatile air compressor that stands as a preferred choice for both DIY enthusiasts and professional contractors alike. Known for its reliability and robust performance, this compressor is designed to handle a variety of tasks, from inflating tires to powering nail guns and spray painting.

One of the main features of the Craftsman 919.769063 is its powerful motor, which typically operates at a horsepower rating of 1.5. This ensures that the compressor can deliver a high volume of air, making it suitable for demanding applications. The compressor’s tank usually has a capacity of around 6 gallons, which allows for extended use without the need for frequent refilling. This balance of power and tank capacity is ideal for both small-scale and larger projects.

The unit is equipped with a direct-drive pump that enhances its efficiency while reducing the maintenance needs. The oil-free design further adds to its appeal, as it eliminates the hassle of regular oil changes, making it a user-friendly option for those new to air compressors. The air compressor typically features a quick-connect air outlet, allowing users to easily switch between different tools and attachments, streamlining productivity during usage.

In terms of portability, the Craftsman 919.769063 is designed with a lightweight frame and integrated handle, making it easy to transport around job sites or within your home. Its compact design ensures that it can fit comfortably in tight workspaces or garages without taking up too much room.

The compressor usually features a control panel with understandable gauges that display pressure levels and an easy-to-use regulator. This feature allows users to customize the air pressure output according to the specific requirements of their tools, enhancing efficiency and performance.

Furthermore, the Craftsman 919.769063 typically includes safety features such as thermal overload protection, which prevents the motor from overheating, ensuring the longevity and safety of the unit.

In conclusion, the Craftsman 919.769063 is a well-rounded air compressor known for its power, portability, and ease of use. With its blend of advanced technologies and user-friendly characteristics, it remains a valuable asset for anyone needing reliable air power for various tasks. Whether you're a seasoned contractor or a home improvement novice, this air compressor can meet a wide range of pneumatic needs effectively.
Top Page Image Contents