English / A-7

INSTALL THE BATTERIES

WARNING!

Use extreme caution when working with batteries. Sulfuric acid in batteries can cause severe injury if allowed to contact the skin or eyes. Explosive hydrogen gas is vented from the batteries through openings in the battery caps. This gas can be ignited by any electrical arc, spark or ﬂame. Do not install any lead-acid battery in a sealed container or enclosure. Hydrogen gas from overcharging must be allowed to escape.

When Servicing Batteries...

*Remove all jewelry

*Do not smoke

*Wear safety glasses, rubber gloves and a rubber apron

*Work in a well-ventilated area

*Do not allow tools to touch more than one battery terminal at a time

*ALWAYS disconnect the negative (ground) cable ﬁrst when replacing batteries to prevent sparks.

*ALWAYS connect the negative cable last when installing batteries.

CAUTION!

Electrical components in this machine can be severely damaged if the batteries are not installed and connected properly. Batteries should be installed by Nilﬁsk or by a qualiﬁed electrician.

1Remove the batteries from their shipping crate and carefully inspect them for cracks or other damage. If damage is evident, contact the carrier that delivered them or the battery manufacturer to ﬁle a damage claim.

2Turn the Master Key Switch (A) OFF and remove the key.

3Remove the recovery tank from the machine. NOTE: Disconnect the tether and the vacuum motor wiring and lift the tank straight up and off the machine.

4Your machine comes from the factory with enough battery cables to install six 6 volt batteries. Using at least (2) people and an appropriate lifting strap, carefully lift the batteries into the battery compartment and arrange them exactly as shown in FIGURE 1. Secure the batteries as close to the front of the machine as possible. If installing a mono-block battery use an overhead hoist.

5Install the battery cables as shown. Position the cables so the battery caps can be easily removed for battery service.

6Carefully tighten the nut in each battery terminal until the terminal will not turn. Do not over-tighten the terminals, or they will be very difﬁcult to remove for future service.

7Coat the terminals with spray-on battery terminal coating (available at most auto parts stores).

8Put one of the black rubber boots over each of the terminals and connect the Battery Pack Connector (20).

FIGURE 1

FORM NO. 56041978 - BR1100S / BR1300S - A-7

BR1100S specifications

The Nilfisk-Advance America BR1100S is a state-of-the-art, battery-powered floor scrubber that stands out for its exceptional performance, user-friendly design, and remarkable efficiency. Ideal for a variety of commercial applications, such as retail spaces, warehouses, and educational institutions, the BR1100S is engineered to provide unparalleled cleaning results while minimizing downtime.

One of the main features of the BR1100S is its compact design, which allows for easy maneuverability in tight spaces. With its slender profile, the scrubber can effortlessly navigate around obstacles, ensuring that no corner is left uncleaned. The machine is equipped with a scrub deck that features a width of 20 inches, making it suitable for medium-sized areas and ensuring quick coverage within stipulated cleaning times.

The BR1100S utilizes advanced lithium-ion battery technology, which provides up to 2.5 hours of continuous cleaning on a single charge. This ensures that cleaning tasks can be completed without interruptions, drastically enhancing productivity. The included charger allows for rapid recharging, further minimizing downtime.

Another key characteristic is the brush system, which employs a dual brush setup that enhances scrubbing efficiency. The scrubbing mechanism is designed to tackle tough dirt and grime while being gentle on the floor surface. Users have the option to select different brush pressure settings based on specific cleaning requirements, providing flexibility for various floor types.

Moreover, the BR1100S is equipped with automatic water control technology, allowing for optimal water usage. This smart system adjusts the water flow based on the cleaning speed, ensuring that floors are cleaned thoroughly without excess water wastage. Additionally, the machine features a simple and intuitive control panel, making it accessible for users of all experience levels.

Maintenance is also a breeze with the BR1100S. The removable recovery tank allows for easy disposal of used water, while the brushes can be changed with minimal effort. Coupled with a durable construction, this scrubber is designed to withstand heavy use, offering longevity and reliability.

In summary, the Nilfisk-Advance America BR1100S is a robust and efficient choice for floor cleaning. With its combination of innovative technology, user-friendly design, and impressive performance, it is a fantastic investment for businesses looking to maintain immaculate spaces.