19
Remove the screws from the side panel corresponding to the closed holes on the canopy upper rim. Keep these screws for later use. Remove the all thread studs from the lower part of the mounting bracket.
22
Install blades to motor using the 10 motor screws provided. Tighten screws securely.
20
Lift fan to mounting bracket, aligning the “L” shape holes with the scresws on the mount- ing bracket. Turn the fan clockwise to lock in position.
21
Place blade holders onto blades aligning holes in blade holder with holes in blade. Make sure that the side of the blade you select is facing downward. Install 3 screws and fiber wash- ers to back side of blade as shown. Tighten screws securely. Repeat this process 4 more times until all blades are assembled.