Monte Carlo Fan Company 4CO28 Such as a tag, to the service panel, Canopy disk Downrod

Page 2

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

1.Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999),

2.including fire-rated construction.

3.Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding con-

4.ductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,

5.such as a tag, to the service panel.

6.Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

7.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7

8.feet from the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support.

9.(Mounting must support at least 35 lbs.)

Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating

10.blades.

11.Attach the mounting bracket using only the hardware supplied with the outlet box.

12.To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

13.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

14.NEVER place a switch where it can be reached from a tub or shower.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heat- ing equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA),

15.and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

 

Phillips Screwdriver

TOOLS REQUIRED

Pliers

 

Wire Cutters

1

2

 

 

 

Before you begin installing the fan, Switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power off at Service panel and lock service dis-

 

Before installing this fan make sure the outlet box is

 

 

connecting means to prevent power from being

 

properly installed to the house structure. To reduce

 

 

switched on accidentally. When the service dis-

 

the risk of fire, electric shock, or personal injury,

 

 

connecting means cannot be locked, securely

 

mount to outlet box or supporting system acceptable

 

 

fasten a prominent warning device, such as a

 

for fan support. (Mounting must support at least 35

 

 

tag, to the service panel.

 

 

lbs.)

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

Canopy disk

 

Downrod

 

 

5

 

Cross Pin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Canopy

 

 

 

 

 

Keeper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pin

 

Yoke

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert downrod into

 

yoke on top of the Fan

 

 

 

 

 

 

 

 

 

 

 

Tread leadwires and

 

safety cable first

 

 

 

 

 

 

 

 

 

 

 

 

Body. Align the hole in the Downrod with the

 

through the canopy disk, canopy and last

 

hole in the Yoke. Insert the Pin through the

 

the downrod.

 

Yoke and Downrod until the point appears on

 

 

 

 

 

 

 

 

 

the other side. Install the Keeper Pin

 

 

 

 

 

 

 

 

 

 

 

 

 

3Step Ladder

Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member ( a loose box will cause the fan to wobble). Use only the screws provided with the outlet box.

6

Tighten the 2 Set screws on the Yoke once the downrod is in place.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents OWNER’S Manual Canopy disk Downrod Such as a tag, to the service panelTread leadwires Safety cable first CanopyBlue Black White Green Pass leadwires and safety cable through the canopyBlack White Ground Page If fan does not start TroubleSuggested Remedy If fan sounds noisy

4CO28 specifications

The Monte Carlo Fan Company 4CO28 is a stunning ceiling fan designed for both style and function, making it an excellent choice for various interior designs. This fan combines contemporary aesthetics with cutting-edge technology, ensuring it not only enhances the decor but also provides efficient airflow.

One of the key features of the 4CO28 is its unique design. This fan is crafted with a sleek and minimalist profile, making it suitable for modern homes, offices, and commercial spaces. It comes in a variety of finishes, allowing customers to select a look that complements their space perfectly. Whether opting for a classic white, elegant silver, or a striking black, the fan's versatility in color enhances its appeal across different decor themes.

In terms of functionality, the 4CO28 is equipped with a powerful motor that ensures optimal airflow while maintaining whisper-quiet operation. This is particularly important in environments where peace and quiet are vital, such as bedrooms or libraries. The fan is designed to circulate air efficiently, helping to maintain a comfortable atmosphere year-round, whether in summer or winter.

The 4CO28 also features multiple speed settings, allowing users to customize their cooling experience. With several speeds to choose from, customers can easily adjust the airflow based on personal preference or climate conditions. Additionally, many models include a reversible motor, enabling the fan to rotate in both directions. This feature aids in cooling during the warmer months and aids in warmth distribution during colder months, enhancing energy efficiency in both scenarios.

Another significant characteristic of this fan is its compatibility with remote control operation in certain models. This convenient feature allows users to control the fan from anywhere in the room without having to get up. Some versions may also offer wireless compatibility, enabling smart home integration for those who prefer to manage their devices through an app or voice activation.

Durability is an essential aspect of the Monte Carlo Fan Company 4CO28. It is made from high-quality materials that are built to last, ensuring that the fan remains a reliable fixture in any space. Its easy-to-clean surfaces further enhance its practicality, making maintenance a hassle-free endeavor.

In summary, the Monte Carlo Fan Company 4CO28 is an impressive ceiling fan that merges style, performance, and durability. With its modern design, powerful motor, multiple speed settings, and additional features such as remote control and reversible operations, this fan stands out as a superior choice for anyone looking to enhance their indoor environment.
Top Page Image Contents