Samsung HCN4727W, PCN5425R, HCN473W, HCN436W Connecting to DVI Digital Visual Interface480p, 720p

I N S TA L L AT I O N

Connecting to DVI (Digital Visual Interface)(480p, 720p, 1080i)

By inputting a high-bandwidth Digital Content Protection high-definition picture source to the DVI INPUT jack on the TV, high-definition pictures can be displayed on the screen in their digital form. (This DVI INPUT jack is for use in the future when High-bandwidth Digital Content Protection DTV decoder, DVD players and D-VHS are put on the market.)

1

Connect a set of audio cables between the DTV Set-Top Box audio in jacks on the TV and the AUDIO OUT jacks on the DTV Set-Top box.

2

Connect a set of audio cables between the AUDIO INPUT jacks on the TV and the AUDIO OUT jacks on the Set Top Box.

3

Connect a DVI cable between

the DVI INPUT jack on the TV and the DVI OUT jack on the Set Top Box.

Note: For an explanation of

Component video, see your

DTV Set-top box’s owner’s instruction.

Notes

•The DVI INPUT jack can only be use with 480p, 720p, and 1080i picture signals. Set the DTV decoder DVI OUTPUT jack output setting to 480p, 720p or 1080i. For detailed information, refer to the Set Top Box instruction manual.

•The DVI INPUT jack is not compatible with the picture signal of a personal computer.

•Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a DTV decoder.

CHAPTER TWO: INSTALLATION 2.10