Connecting a VCR | Samsung HCN553W, PCN5425R, HCN473W, HCN4727W

I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

2

Connect a set of audio cables between the

AUDIO OUT jacks on the VCR and the

AUDIO jacks on the TV.

If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable.

3

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

If you have a S-VHS VCR, use the S-Video connections and remove the video cable. Do not connect the video cable and the S- Video cable to video 1 simultaneously.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model.

2.5 CHAPTER TWO: INSTALLATION

Image 18

Samsung HCN553W, PCN5425R, HCN473W, HCN4727W, HCN436W, HCN5527W, HCN653W manual Connecting a VCR

Contents

Owner’s Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Safety Installation Your New TVOperation Special Features Troubleshooting List of Features Chapter One Familiarizing Yourself with The TV ´ Video Input jack Using the Component ShelfFront or Side Panel Jacks Audio Input jacks ´ AUDIO-VIDEO Monitor Output jacks Rear Panel Jacks Depending on the modelAntenna terminals Video Input jack Video Input jacks ´ +100 Remote ControlPower StillMain ¿ S.Mode ± Mode˘ R.surf ¸ P.Mode Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin Leads Separate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable Box Connecting to a Cable Box that Descrambles Some Channels Cable with a Cable box that Descrambles All ChannelsConnect this cable to a two-way splitter S TA L L AT I O N Connecting a VCR Connecting a Second VCR to Record from the TV Connecting a Camcorder Connecting a DVD Player, DTV Set-Top Box 480i, 480p Connecting to Y, PB, PR Connecting a DTV Set-Top Box Connecting to Y, PB, PR 480p Connecting to DVI Digital Visual Interface480p, 720p Installing Batteries in the Remote Control Install two AAA size batteries Replace the cover Turning the TV On and Off Plug & Play FeaturePress the Power button Message Plug & Play is displayed If you want to reset this feature Using the Perfect Focus Feature Adjusting Manual Convergence Adjust Red Convergence Viewing the Menus Press the Display button on the remote controlViewing the Menus and On-Screen Displays Viewing the Display Selecting a Menu Language Selecting the Antenna Input Selecting the Video Signal-source Memorizing the Channels Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Using the Previous Channel Using the Channel ButtonsUsing the Number Buttons Changing Channels Selecting Your Favorite Channels To Store Your Favorite ChannelsTo View Your Favorite Channels Adding and Erasing Channels Manual Method Select Channel, then Labeling the ChannelsPress CH or CH to tune to the channel that will be labeled Left-most field will be highlighted Picture Control Customizing the Picture Using Automatic Picture Settings Press the Menu button. Picture icon will be high- lighted Sound Control Adjusting the VolumeUsing Mute Selecting the Color Tone Customizing the Sound Press the Menu button exit Using Automatic Sound Settings Alternate method Setting the Clock Option 1 Setting the Clock ManuallyPress the CH or Press the Menu Press the VOL + button to select Auto clock set On Viewing an External Signal Source Fine Tuning Channels Press the VOL + or VOL button to adjust the fine tuningStar icon*will appear Digital Noise Reduction Wide TV Changing the Screen Size43 TV Press the Aspect button to change the screen Using the R.surf feature Setting the On/Off Timer Select Function, then Setting the Sleep Timer When finished, press the VOL + buttonPress the Sleep button on the remote control Extra sound settings Surround, Auto Volume, Melody, BBE Surround Select MTS, then Press Choosing a Multi-Channel Sound MTS SoundtrackSelect Sound, then Select Mono, SAP, or Viewing Closed Captions Select Mode, then pressSelect Caption or Text Viewing Picture-in-Picture Activating Picture-in-Picture Select PIP, then press Selecting a Signal Source Antenna or Cable for PIPSelecting a Signal Source External A/V for PIP VOL + button Swapping the Contents of the PIP Image and Main Image Changing the Size of the PIP Window Changing the Location Rotating in PIP mode Changing the PIP ChannelScanning the Available Channels Enter Pin screen will appear. Enter your 4-digit PIN number Using the V-ChipSetting Up Your Personal ID Number PIN While the Change pin How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelines Parent Guidance TV Guidelines screen will appearGeneral audience TV-14 Or CH Mpaa rating screen will appear Highlighted blinking Viewing the DemonstrationPicture icon will be Select Demonstration Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDTurn off your VCR or Setting Up Your Remote Control to Operate Your Cable Box Codes VCR CodesCable Box DVD Codes Identifying Problems Chapter Five Cleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications M O Appendix A.3