Samsung HCN436W, PCN5425R, HCN473W, HCN4727W, HCN553W, HCN5527W Viewing an External Signal Source

O P E R AT I O N

5

Press the CH button to select “Time Zone”.

While “Time Zone” is select- ed, then press the VOL+ or VOL- to change the Time zone.

Sequence: ATL., EAST, CEN., MTN., PAC., ALAS., HAW.

	Auto Clock Set
Auto Clock Set	: On
PBS Channel	: ANT 3
Time Zone	: EAST
DST	: No

6

Press the CH button to select “DST”(Daylight saving time). While “DST” is select- ed, press the VOL+ or VOL- button to indicate “Yes” or “No”.

The clock is set.

Press the MENU button to exit.

	Auto Clock Set
Auto Clock Set	: Off
PBS Channel	: ANT 3
Time Zone	: ATL.
DST	: Yes

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable).

1

Press the TV/Video button. You will switch between viewing the signals coming from equipment connected to the TV’s A/V jacks, and the TV signal.

When you connect equipment to the TV, you can choose between the following sets of jacks : Video 1, Video 2, S-Video 1, Component 1, Component 2, Component 3(option) or DVI on the TV’s rear panel, and Video 3 or S-Video 2 on the TV’s side panel.

CHAPTER THREE: TV OPERATION 3.21