Samsung HCN4727W Labeling the Channels, Select Channel, then, Left-most field will be highlighted

O P E R AT I O N

Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num- ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number.

1

Press CH or CH to tune to the channel that will be labeled.

2
			Channel
Press the Menu button.
		Antenna	: A
Press the CH	button to	ANT/CATV	: ANT
		Auto Program
select “Channel”, then		Fav. Channel
		Fine Tune	: 00
press the VOL + button.		Add/Erase
		Labeling	: - - - -

▼ Note: You cannot select

“Labeling” in the A/V mode.

3

Press the CH button to select “Labeling”.

Press the VOL + button to begin labeling.

The left-most field will be highlighted.

(Each label has four fields. See top paragraph.)

	Channel
Antenna	: A
ANT/CATV	: ANT
Auto Program
Fav. Channel
Fine Tune	: 00
Add/Erase
Labeling	: - - - -

4

Press the CH or CH button to select a letter,

a number, or a blank. (Press the CH or

CH button results in this sequence: A,B,...Z, blank, 0,1,...9).

5

Press the VOL + button switch to the next field, which will be highlighted. Select a second letter or digit pressing the CH or CH button, as above. Repeat the process to select the last two digits.

	Channel
Antenna	: A
ANT/CATV	: ANT
Auto Program
Fav. Channel
Fine Tune	: 00
Add/Erase
Labeling	: A - - -

	Channel
Antenna	: A
ANT/CATV	: ANT
Auto Program
Fav. Channel
Fine Tune	: 00
Add/Erase
Labeling	: A B C 1

Press the Menu button to exit the menu.

CHAPTER THREE: TV OPERATION 3.13