Pipe cover with Cable tie | Mitsumi electronic CMY-R100VBK specs

(2) Low-pressure twinning kit in CMY-R100VBK

Use either F or G in table 1,(1) Package Contents depending on the size of the pipe at the control valve on the unit to be combined with. Attach items H, I, and J to the stop valve sheet metal and then to the low-pressure twinning kit to hold it into place.

1.Attach item J to the stop valve sheet metal.

2.Attach the packing and saddle.

3.Secure the low pressure twinning kit.

3	3	1
	F or G	1
Stop valve	H,I,J
	Section to be brazed field-supplied

(3)Routing the pipe through the bottom

(1)Braze item 7 high-pressure pipe to the stop valve so that the dimples on the pipe are parallel to the edge of the cutout hole. Expand the end of the field-supplied pipes, and braze them to item 7 high-pressure pipe.

(2)Attach item 1 low-pressure twinning kit to the sheet metal of the control valve with item 3 screw, and braze it to the control valve.

(3)Braze item 5 or 6 elbow pipe to the field-supplied pipe first, and then braze it to item 1 low-pressure twinning kit.

(4)Flare the field-supplied pipe end, and braze the pipe to the

low-pressure pipe in the middle.

(5)Wrap the pipe in front of item 1 low-pressure twinning kit with item

9 pipe cover, and attach compressor cables to item 9 pipe cover with item M cable tie to keep them out of direct contact with the pipes.

CAUTION

·Before heating the pipes, place a wet towel on the control valve to keep its temperature below 120 ˚C [248˚F].

·Direct the flame away from the cables and sheet metals inside the unit so as not to burn them.

Connect the pipe so that the dimples on the 7 high pressure pipe are on an imaginary line parallel to the edge of the cutout hole.

Field-supplied	5,6
pipes	Field-supplied pipes
	9
	Wrap the pipe cover here.
	Attach compressor cables to
	Pipe cover with Cable tie
	to keep them out of direct
	contact with the pipes.

(4)Routing the pipe through the front

(1)Braze item 8 high-pressure pipe to the control valve.

(2)Attach item 1 low-pressure twinning kit to the sheet metal of the control valve with item 3 screw, and braze it to the control valve.

(3)Braze item 5 or 6 elbow pipe to the field-supplied pipe first, and then braze it to item 1 low-pressure twinning kit.

(4)Braze either item 4 or 5 elbow pipe to the low-pressure pipe in the middle.

(5)Wrap the pipe in front of item 1 low-pressure twinning kit with item 9 pipe cover, and attach compressor cables to item 9 pipe cover with item M cable tie to keep them out of direct contact with the pipes.

Wrap the pipe cover here. Attach compressor cables to Pipe cover with Cable tie to keep them out of direct contact with the pipes.

CAUTION

·Before heating the pipes, place a wet towel on the control valve to keep its temperature below 120 ˚C [248˚F].

·Direct the flame away from the cables and sheet metals inside the unit so as not to burn them.

(5) Slope of twinning pipes (high-pressure side only)

Make sure the slope of the twinning pipes are at an angle within ±15˚ to the horizontal plane.

If the slope exceeds the specified angle, the unit may be damaged.

5,6

8 4,5 Field-supplied pipes

Note. Refer to the figure below for the installation position of the twinning pipe. Twinning pipe on the high-pressure side

± 15˚

Slope of the twinning pipe is at an angle within ± 15˚ to the horizontal plane.

CMY-R100VBK, CMY-R200VBK specifications

The Mitsumi electronic CMY-R100VBK and CMY-R200VBK are cutting-edge components designed to meet the diverse needs of modern electronic devices. These products reflect Mitsumi's commitment to quality and innovation in the realm of electronic manufacturing, ensuring that users receive reliable and high-performance solutions for their applications.

The CMY-R100VBK is a versatile device that excels in its ability to handle a variety of tasks efficiently. It features advanced communication interfaces, including multiple I/O ports for easy integration into various systems. This model is particularly suited for applications in consumer electronics, where a compact and energy-efficient solution is paramount. The CMY-R100VBK also boasts a robust power management system, allowing for seamless operation even in fluctuating power conditions, which is essential for portable and battery-operated devices.

In contrast, the CMY-R200VBK offers enhanced capabilities, making it ideal for more demanding applications. It includes additional computational power and memory, allowing for faster processing times and improved multitasking capabilities. This model is perfect for applications in industrial automation and smart home technologies, where speed and reliability are critical. The CMY-R200VBK's design also incorporates advanced thermal management, ensuring stable performance even under heavy loads.

Both models are equipped with advanced technologies such as built-in diagnostic features, which provide real-time monitoring and troubleshooting capabilities. This functionality helps engineers and technicians quickly identify and resolve issues, reducing downtime and increasing overall efficiency. The ease of use and integration provided by both models makes them a favorite among developers and manufacturers alike.

Furthermore, the CMY-R100VBK and CMY-R200VBK demonstrate versatility in their compatibility with various communication protocols, including I2C and SPI. This allows them to communicate seamlessly with a wide range of peripherals and sensors, enhancing their adaptability for different applications.

In summary, Mitsumi's CMY-R100VBK and CMY-R200VBK represent the pinnacle of modern electronic design, combining compactness, efficiency, and flexibility to cater to the evolving demands of the technology landscape. Whether for consumer applications or industrial systems, these models provide users with the performance and reliability essential for today's high-tech world.