Mega Catch Mini technical manual Through vent hole, Exterior Blower Kit

Page 15

Installation

EXTERIOR MOUNTED EXHAUST BLOWER (20-070):

The Mini can be equipped with an externally mounted exhaust blower. This optional kit includes all components necessary to install the exhaust blower on any vertical wall surface.

Choose a location for your stove that meets the requirements stated in your manual and allows installation with the least amount of interference with house framing, plumbing, wiring, etc.

Included in the Exterior Mounted Exhaust Blower Kit are: 1 - Exhaust blower housing box.

1 - Blower cover plate.

1 - Hardware bag

Figure 18: Exterior Blower Kit.

 

1.

Remove the left hand cabinet side by removing the two

 

 

(2) screws down the front. Loosen the three screws on the

 

 

back of the cabinet side and remove panel.

 

2.

Loosen the six (6) screws that hold the back grill in place.

 

 

Lift the back grill off the screws.

 

3.

Disconnect the Exhaust blower wires from the wire

 

 

harness. Remove the exhaust blower motor from the

 

 

housing; six (6) screws. Cover hole in housing with cover

 

 

plate provided (see Figure 19).

Figure 19: Exterior Blower Kit.

4. Remove the cover from the exhaust blower housing box.

 

5.

Install the exhaust blower housing box into the pipe placed

 

 

through the wall thimble, seal with high temperature

 

 

silicone. Fasten the box to the wall with (4) four screws,

 

 

seal edges of box to wall with clear silicone.

 

6.

Drill a hole through the wall thimble plate for the electrical

 

 

wires. Pass the armored cable through the wall thimble.

 

 

Use the strain relief provided. Do not pass cable

 

 

through vent hole.

 

7. Install the Exhaust Blower motor into the external exhaust

 

 

blower housing box. Make the electrical connections to the

 

 

wire harness and exhaust blower.

 

8.

Replace the cover on the Exhaust Box and the back grill of

 

 

the stove and ensure the screws are tightened down.

Figure 20: Exterior Blower Kit cut-through.

9.

Install vertical pipe as instructed in appropriate section.

 

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Mini Table of Contents Introduction Introduction Screws to take out to remove stove from Pallet InstallationDimensions of Mini 91.5 cm Crawlspace, narrow Walkway Closely At center of unit Wiring, etc Page Venting horizontally with rise Refer to Figures 16 Freestanding hearth mount installation overview Exterior Blower Kit Through vent holeThrough Wall Installation with Exterior Blower Kit Sheathing To install the Optional slider damper rod, remove the left Special Notes Kit Components Installing the PanelsInstalling Hopper Lid Installing Hopper LidTroubleshooting Stove will not operate when hotStove will not start 200 F 93 C high limit temperature sensor has tripped Exhaust motor will not function normallyLight # 2 on Heat output bar flashing Stove keeps going out Control settings Heat Level has no effect on the fireConvection blower will not function normally Ignitor- the pellets will not light5V DC Wiring DiagramReference Description Part Number Parts ListParts List Parts Diagram Components Parts Diagram Steel For the do-it-yourself Individual WarrantyName of Owner Address Installation Data Sheet

Mini specifications

The Mega Catch Mini is a state-of-the-art mosquito trap designed for users who demand effectiveness and ease of use in pest control. Compact in size yet powerful in performance, this innovative device is perfect for both indoor and outdoor settings, making it a versatile solution for homeowners and outdoor enthusiasts alike.

One of the main features of the Mega Catch Mini is its advanced CO2 technology. This trap imitates human breath by releasing carbon dioxide, which attracts mosquitoes and other flying insects. By mimicking the natural allure of humans, the Mega Catch Mini effectively increases its catch rate, ensuring fewer pesky insects buzzing around your space.

Another notable characteristic is its silent operation. Unlike traditional bug zappers that create an audible zap sound, the Mega Catch Mini operates quietly, ensuring that your peaceful evenings are undisturbed. This makes it an ideal choice for patio gatherings, backyard barbeques, or simply enjoying a quiet night at home.

The Mega Catch Mini is also equipped with a powerful fan that draws insects into a contained trap, preventing their escape. This efficient trapping mechanism eliminates the need for toxic chemicals or harmful pesticides, making it a safer option for households with children and pets.

Easy to set up and use, the Mega Catch Mini features a simple plug-and-play design. Users can easily place it in any location for optimal performance. Its lightweight design makes it easy to move from one area to another, ensuring that you can adapt to varying outdoor conditions.

In terms of maintenance, the Mega Catch Mini is user-friendly. It has a removable catching tray that can be easily cleaned and emptied. This simplicity in maintenance ensures that users can operate the unit consistently without the hassle of complicated procedures.

Power-efficient design is another hallmark of the Mega Catch Mini. It consumes minimal energy compared to traditional insect traps, reducing your electricity bills while keeping your space free from bugs.

Overall, the Mega Catch Mini stands out as an effective, user-friendly, and environmentally-friendly solution for controlling mosquito populations. Its innovative technology, combined with practical features, makes it a top choice for anyone looking to enjoy their outdoor spaces without the nuisance of insects.
Top Page Image Contents