Operation Guide
HOW TO INSTALL BATTERIES
1.Slide the cover in the direction indicated by the arrow and remove it.
2.Install two AAA alkaline batteries. Make sure the batteries point in the direction m arked in the battery compartment.
3.Use a thin object such as the tip of a pen to press the ACL button.
!NOTE
HOW TO USE THE REMOTE CONTROL UNIT
ACL button
B
A
●Replace the batteries when the remote control unit's display fails to light, or when the remote control unit cannot be used to change the air conditioner,s settings.
●Use two fresh
●In replacing batteries, follow the instructions as mentioned in the sub- section“How to install Batteries”.
●If you do not use the remote control unit more than 1 month, take out the batteries.
When using the remote control unit, always point the unit's transmitter head directly at the air conditioner's receiver.
Air conditioner (Indoor unit)
Remote control unit
Receiver
(Transmitter head)
REMOTE CONTROL UNIT INSTALLATION POSITION
DO NOT
To ensure that the air conditioner operates correctly, DO NOT install the remote control unit in the following places:
In direct sunlight
Behind a curtain or other places where it is covered
More than 8 meters away from the air conditioner
In the path of the air conditioner's airstream
Where it may become extremely hot or cold
Where it may be subject to electrical or magnetic noise
Where there is an obstacle between the remote control unit and the air conditioner
8 