How to remove the
Cleaning
How to replace the
Air Clean Filter (not provided)
!WARNING
How to install the air clean filter
Care and Cleaning (continued)
The
1.Grasp both ends of the air intake grille and pull it out and up.
2.Push the
Air intake grille
Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it. 1.With the “前面”(meaning FRONT) mark facing you, slide the
filter up into the unit and then lower the handle into the groove on the unit. 2.After installing the
( 
) and close the air intake grille.
Air intake grille
The air cleaning filter removes dust and dirt from the air, and reduces odors and somke from tobacco.
This air clean filter cannot remove harmful gases or vapors nor ventilate air in the room. You must open doors or windows frequently when you use gas or oil heating appliances.Otherwise there is a risk of suffocation in extreme cases.
The air clean filter needs to be installed behind the
1.Remove the
2.Install the air clean filter in the position shown in the diagram, with the“前面” （meaning FRONT）symbol facing the front.
3.Reinstall the
Air clean filter
17