8ELECTROGLIDE
MAINTENANCE AND CARE
WARNING
Always unplug electrical cord and vacuum hose before servicing and maintaining the Electroglide Electric Powerhead. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. Always follow all safety precautions specified when caring
for your Electroglide.
Light Bulb Replacemnent
1.Disconnect cleaner from electrical outlet.
2.Remove light cover by pressing in and lifting both sides of cover as shown.
Push In |
And Turn |
3. Push in and turn bulb counter clockwise to remove.
4. Replacement bulb must not be higher than 15 watts
(Part #7967).
5. Close light cover until it snaps in place.
Brush Cleaning
Check the brush roll and brush support areas frequently in order to maintain optimum efficiency. If hair, string, thread, carpet fiber or lint becomes wound around the brush roll, remove by unwinding them by hand or carefully cutting with scissors. If buildup becomes excessive, disconnect the Electroglide Powerhead from the wand assembly and follow the Brush Replacement steps on Page 11. Instructions can also be found under the light cover.