Generac Power Systems OG 2697 manual Other Published Standards, Grounding the Generator

Page 4

NFPA 101, LIFE SAFETY CODE

NFPA 110, STANDARD FOR EMERGENCY AND STANDBY POWER SYSTEMS

NFPA 220, STANDARD TYPES OF BUILDING CONSTRUCTION

NOTE:

It is essential to use the latest version of any standard to ensure that the generator and its accessories comply with all the applicable standards and local codes.

Other Published Standards

In addition to NFPA standards, the following information pertaining to the installation and use of standby electric systems is available:

Article X, NATIONAL BUILDING CODE, available from the American Insurance Association, 85 John Street, New York, NY 10038.

AGRICULTURAL WIRING HANDBOOK, obtainable from the Food and Energy Council, 909 University Avenue, Columbia, MO 65201.

ASAE EP-364.2, INSTALLATION AND MAINTENANCE OF FARM STANDBY ELECTRIC POWER, available from the American Society of Agricultural Engineers, 2950 Niles Road, St. Joseph, MI 49085.

A52.1, AMERICAN NATIONAL STANDARDS FOR CHIMNEYS, FIREPLACES AND VENTING SYSTEMS, available from the American National Standards Institute, 1430 Broadway, New York, NY 10018.

The installer must comply with all applicable state and local codes.

Grounding the Generator

A grounding lug is provided on the generator mounting base for the purpose of grounding the frame and the external electrically conductive parts of this equipment to an approved earth ground and/or grounding rods where required by the National Electrical Code. Grounding procedures must meet local regulations.

Battery Installation

Standby generators installed with automatic transfer switches will crank and start automatically when NORMAL (UTILITY) source voltage is removed or is below an acceptable preset level. To prevent such automatic start-up and possible injury to personnel, do not connect battery cables until certain that normal source voltage at the transfer switch is correct and the system is ready to be placed into operation.

Storage batteries give off explosive hydrogen gas. This gas can form an explosive mixture around the battery for several hours after charging. The slightest spark can ignite the gas and cause an explosion. Such an explosion can shatter the battery and cause blindness or other injury. Any area that houses a storage battery must be properly ventilated. Do not allow smoking, open flame, sparks or any spark producing tools or equipment near the battery.

Battery electrolyte fluid is an extremely caustic sulfuric acid solution that can cause severe burns. Do not permit fluid to contact eyes, skin, clothing, painted surfaces, etc. Wear protective goggles, protective clothing and gloves when handling a battery. If fluid is spilled, flush the affected area immediately with clear water.

Do not dispose of the battery in a fire. The battery is capable of exploding.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation Guidelines General Hazards Before Installation Generator InstallationNfpa Standards Other Published Standards Battery InstallationGrounding the Generator Vented Batteries Site Preparation & Generator Placement Before You BeginPage Converting To LP Vapor Installing & Connecting Gas Lines Page External Electrical Connections Installing The Automatic Transfer Switch When three-conductor wiring is used, two Operational Tests Page Page Page Setting The Automatic Exercise Function Page Generac Power Systems, Inc. All rights reserved

OG 2697 specifications

Generac Power Systems OG 2697 is a robust and reliable generator designed to provide seamless power solutions for various applications, ranging from residential use to small commercial operations. Known for its durability and efficiency, the OG 2697 stands out in the competitive generator market, making it a preferred choice for many users seeking dependable energy solutions.

One of the main features of the OG 2697 is its dependable power output. With a substantial wattage capacity, this generator is capable of handling multiple appliances and devices simultaneously. Whether it's powering essential household equipment during an outage or supplying energy for outdoor events, the OG 2697 delivers consistent performance.

The generator is equipped with advanced technologies to optimize its operation. It incorporates a powerful, highly efficient engine that ensures high fuel efficiency while minimizing emissions. This not only contributes to lower operational costs but also aligns with contemporary environmental standards. The OG 2697 boasts a user-friendly control panel, providing easy access to vital information such as fuel levels and operational status. This intuitive interface simplifies the operation process, making it accessible even for those with limited technical knowledge.

Another noteworthy characteristic is its portability. The OG 2697 is designed with mobility in mind, featuring a compact and lightweight structure that allows for effortless transport. This is especially beneficial for users who need to move the generator for various applications, from backyard parties to job sites.

Durability is a hallmark of the Generac brand, and the OG 2697 is no exception. Its rugged construction ensures it can withstand the rigors of outdoor use. Additionally, the generator is equipped with built-in safety features, such as automatic shutoff systems and overload protection, which enhance its reliability and ensure safe operation.

In conclusion, Generac Power Systems OG 2697 offers a winning combination of power, efficiency, portability, and durability. With its innovative features and user-centric design, this generator is well-suited for a wide range of applications, ensuring users have the reliable power they need when it matters most. Whether for home backup or outdoor activities, the OG 2697 continues to be a top choice for those seeking dependable energy solutions.
Top Page Image Contents