Replacement Instructions

Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below.

REPLACING THE HEADLIGHT LAMP

1 Set the vacuum cleaner to the parallel position.

2 Loosen the screws to remove the lens.	Headlight Lamp
When removing the headlight lamp, be careful	Lens
3 not to pull on the headlight lamp wiring.
	Screw

Remove the lamp by pushing it gently in 4 the direction of the arrow and then turning

it counterclockwise.

Socket Lamp

Push a new lamp gently into the socket and 5 turn it clockwise to tighten it .

Use a standard bayonet base appliance lamp

rated at 120V and 15W (LAMP MAX.15W).

Socket

Caution: Be careful not to clamp the headlight lamp wiring.

6 Reattach the lens and fasten the screws.