USING THE VACUUM CLEANER
HEIGHT ADJU STMENT LEVER
Height Adjustment Lever
The nozzle head can be adjusted to four different height settings.
Cautio n:
Before using the height adj- ustment lever,please make sure the nozzle head is tilted backward from the floor.
Nozzle Head
Set the height adjustment to the appropriate carpet length.
Use the 3rd(
)height setting.
Use the 4th(
)height setting. 
RUG/FLOOR (TOOLS)SELECTOR
The RUG/FLOOR(TOOLS)selector should only be adjusted while the vacuum cleaner is turned on and in the upright position.
When cleaning a rug or carpet,first turn the
1ON/OFF switch to the ON position,and then set the RUG/FLOOR(TOOLS)selector to the RUG position.
2When cleaning a bare floor or when using one of the attachments, set the RUG/FLOOR (TOOLS)selector to the FLOOR position.
FLOOR Position
RUG/FLOOR(TOOLS)selector
Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuum cleaner is turned off.
EDGE CLEANING
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges near baseboards and stationary furniture.
7