TROUBLESHOOTING
If there is a problem with the vacuum cleaner, carry out the following checks
to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring.
Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the wall outlet, and contact FANTOM Customer Service at
Or visit our website at www.fantom.com
Problem |
| Cause | Remedy | ||
The motor does not operate | The | power cord plug is not | Insert the power | cord plug | |
when the ON/OFF switch is | securely inserted into the | securely into the | wall | ||
set to the "ON" position. | wall outlet. | ||||
outlet.(refer to page 5 ) | |||||
|
|
| |||
|
|
|
| ||
Suction force is weak. | The dust compartment is full. | Empty the dust compartment. | |||
| (refer to page 9) |
| |||
| The | suction hose is blocked. | Remove the blockage. | ||
| (refer to page 11) |
| |||
|
|
|
| ||
| The | nozzle head is blocked. | Remove the blockage. | ||
| The | filters are dirty. | (refer to page 11) |
| |
| Clean the filters. |
| |||
| The | nozzle air inlet pipe is | (refer to page 10) |
| |
| Remove the blockage. | ||||
| blocked. | ||||
| (refer to page 11) |
| |||
The agitator does not | The | flat belt is worn or | Replace the flat belt. | ||
operate. | broken. | (refer to page 12 ) |
| ||
|
|
|
|
| |
TO ORDER REPLACEMENT FILTERS CALL 1-800-275-9251
16