Fantom Vacuum FM760 instruction manual Removing the Bottom Plate, Reattaching the Bottom Plate

Page 16

REPLACEMENT INSTRUCTIONS

REMOVING THE BOTTOM PLATE

Set the vacuum cleaner to the

1 parallel position and turn it over.

Slide the latch in the direction	Latch
2 of the arrow.

Remove the bottom plate by pulling

3 the tabs as illustrated.

Pull here

Bottom Plate

REATTACHING THE BOTTOM PLATE

Insert the projection on the bottom plate 1 into the groove on the nozzle head

and set the bottom plate in place.

Bottom Plate

Projection

Groove

2 Push the bottom plate as shown.

Press

Press

3	Slide the latch in the direction shown.	Turn the vacuum over and place in the
3		4 upright position.

Latch

Nozzle Head

Height Adjustment Lever

14

Image 16

Contents FM760 Page Important Safety Instructions Read ALL Instructions Before Using this Vacuum CleanerPage Name of Each Part Preparation Before USE Attaching the handleReleasing the Power Cord Winding the Power CordInserting the Power Cord Plug ON/OFF Switch Using the Vacuum CleanerAdjusting the Handle Using the Vacuum Cleaner Using the Attachments Power cord from the wall outlet before cleaning Emptying the Dust CompartmentCleaning the Filters Cleaning UtensilClearing blockages in the suction hose Replacement Instructions Replacing the Headlight LampReplacing the Flat Belt Removing the Bottom Plate Reattaching the Bottom PlateReplacing the Hepa Filter Troubleshooting Problem Cause RemedyONE 1 Year Limited Warranty