REPLACEMENT INSTRUCTIONS
Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below.
Replacing the Headlight Lamp
1 Set the vacuum cleaner to the parallel position.
2 | Loosen the screws to remove the lens. | |
Screw | ||
|
Lens
When removing the headlight lamp, be careful
3 not to pull on the headlight lamp wiring.
Remove the lamp by pushing it gently in | 2 |
|
4 the direction of the arrow and then turning |
| |
it counterclockwise. | 1 |
|
|
| |
| Headlight Lamp | Socket |
Push a new lamp gently into the socket and |
|
|
5 turn it clockwise to tighten it . |
|
|
Use a standard bayonet base appliance lamp | 2 |
|
rated at 120V and 15W (LAMP MAX.15W). |
|
|
| 1 |
|
|
| Socket |
Caution: Be careful not to clamp the headlight lamp wiring.
6 Reattach the lens and fasten the screws.
12